24 August 2021 in Journal of Lightwave Technology
An ameliorated phase generated carrier demodulation algorithm based on a reference interferometer is proposed. It is theoretically analyzed, numerically simulated, and experimentally verified in this paper. The method of matching the amplitude of the quadrature signal in the reference interferometer algorithm eliminates the harmonic distortion caused by modulation depth fluctuations, suppresses system noise, and improves system stability. In experiments, where the sensed signal amplitude is 0.68 rad, the frequency is 1 kHz, and the modulation depth ranges from 1.5 to 3.5 rad, the ameliorated algorithm has SINAD that reaches 24.5 dB, which is an average improvement of 7.9 dB over the PGC-DCM algorithm based on a reference interferometer and an average improvement of 3 dB over the PGC-Arctan algorithm based on a reference interferometer. The ameliorated algorithm achieves a THD of 0.451%, which consistently maintains the best level of the traditional PGC algorithm based on a reference interferometer. The method provides an effective reference for signal processing in practical applications of fiber-optic sensors.
30 November 2022 in Journal of Lightwave Technology
Traditional phase generation carrier technology requires to control the modulation depth at an optimal value for accurate demodulation. In this paper, we proposed an algorithm to directly eliminate the real-time phase modulation depth based on multi-harmonics frequency mixing technology for avoiding the influence of phase modulation depth on the demodulation result. Experiments show that when the modulation depth is in the range of 1.5 to 3.5 rad, the SINAD of the improved algorithm can reach 37.1 dB, which is 13.2 dB higher than that of the traditional PGC-Arctan algorithm on average. The THD of the improved algorithm can reach 0.322%, which always maintains the best level of the traditional PGC-Arctan algorithm. The algorithm provides an effective reference for the signal processing of the fiber-optic interferometric sensors in practical applications.
18 August 2023 in Journal of Lightwave Technology
Refining the noise floor and enhancing reliability are crucial for optical fiber sensing systems employing 3 × 3 coupler phase demodulation technology. In this article, we achieve the intensity noise cancellation by dividing the interference signal directly by the laser intensity. Experimental results show an average noise floor reduction of 11.2 dB and a maximum reduction of 17.3 dB at 50 kHz. We then optimize the commonly used ellipse fitting algorithm (EFA) in the 3 × 3 coupler demodulation system to overcome its inability to work properly in demodulating small signals. The improved algorithm ensures the equality of direct current (DC) values of the two interference signals by introducing gradient descent. Additionally, it rotates the coordinate system to transform the Lissajous figure into a standard ellipse with fixed phase difference and limited center. This transformation reduces the five parameters of the EFA model to three. Experimental results demonstrate that this demodulation scheme achieves an 99.98% linearity and 1.56 μrad/√Hz phase measurement resolution. Notably, it offers several advantages, including low noise floor, high reliability, and the absence of phase modulation requirements, making it highly applicable in 3 × 3 coupler demodulation systems.
16 December 2024 in Optics Express
This paper proposes a high-performance fiber optic interferometric hydrophone based on composite structure. Based on the air-backed push-pull fiber optic hydrophone structure, the inner elastic tube is replaced by a thick hollow column, introducing axial acoustic pressure sensing to improve the detection sensitivity of the fiber optic hydrophone. The influence of axial stress on the deformation of the composite structure is investigated by theoretical analysis and numerical simulation, and the structural design of fiber optic hydrophone with high acoustic pressure sensitivity and wide frequency response range is realized. The experimental results indicate that the average sensitivity of the fiber optic hydrophone based on the composite structure reaches –113.25 dB re rad/µPa with a frequency range of 10 Hz-3 kHz, approximately twice as much as compared with the push-pull structure, which is basically in accordance with the theory and simulation. Besides, the minimum detectable pressure (MDP) of the fiber optic hydrophone is about 2 µPa/√Hz at 1 kHz and 0.56 mPa/√Hz at 10 Hz. Compared to other state-of-the-art mandrel fiber optic hydrophones, the composite structure has improved MDP by at least 6 dB at 1kHz, which provides excellent potential for application in underwater weak signal detection.
19 January 2023 in Journal of Lightwave Technology
In an unbalanced interferometer, the phase noise level is positively related to the optical path length difference (OPD) and the wavelength instability of the light source. The effective current solution for reducing phase noise is to use an auxiliary reference interferometer to measure the phase noise signal. However, this method requires that all interferometers have the same OPD, otherwise the phase modulation depth of different interferometers with the same light source will be different and the noise reduction effect will be severely reduced. It is difficult to provide interferometers with precisely the same OPD in practical. In this paper, an improved phase-generated carrier (PGC) demodulation technique for phase noise cancellation that does not require strictly equal OPDs of interferometers is proposed. Combining an auxiliary reference interferometer scheme with an ellipse fitting algorithm (EFA) can eliminate the effect of different phase modulation depths due to different OPDs, and phase modulation depth drift on demodulation results, significantly reducing harmonic distortion. The additional phase modulation signal ensures the correct calculation of small signals by the EFA, while the OPDs of the interferometers are evaluated in real time to achieve constant phase noise cancellation capability under different OPD. Experimental results show that the proposed technique achieves a highly stable phase demodulation result with a maximum phase noise reduction of about 9dB and a minimum THD of -74.59 dB in interferometers with non-strict equal OPD.
5 December 2023 in Journal of Lightwave Technology
An ellipse-fitting cross-multiplication phase demodulation technique (EFCM-PDT) based on a reference interferometer is proposed to suppress the effect of laser-introduced phase noise (LPN). The sensor signal and the reference signal are processed by ellipse-fitting algorithm to obtain two pairs of orthogonal signals. In order to reduce the cost of computing power, the cross-multiplication (CM) algorithm is used to subtract the phase information of the interference signals to suppress the influence of LPN. The experimental results show that the suppression effect of EFCM-PDT on LPN was up to 41 dB and that the system has a noise floor of -126.35 dB at 160 Hz. Additionally, the system's operation time of 12-13 seconds is significantly shorter than that of the ellipse-fitting phase demodulation technique (EF-PDT), which can take up to 153 seconds. EFCM-PDT is an effective LPN suppression scheme while overcoming the slow operation of the EF-PDT system for the application of interferometric sensor technology.