A nanosheet-constructed ZnO/ZnFe2O4 composite with high photocatalytic activity is obtained via the one-step pyrolysis of a Zn–Fe mixed-metal–organic framework precursor.
12 February 2016 in Desalination and Water Treatment
A magnetic hybrid material (Fe3O4-embedded-MOF) consisting of a stable metal–organic framework HKUST-1 embedded with poly(N-vinyl-2-pyrrolidone) coated Fe3O4 microspheres was simply prepared under refluxing conditions for 4 h. The as-synthesized material was characterized using powder X-ray diffraction, scanning electron microscopy (SEM), vibrating sample magnetometry (VSM), energy dispersive spectroscopy (EDS) and N2 adsorption–desorption at 77 K. The hybrid material was studied for the adsorption of methylene blue from aqueous solution. The effects of dye concentration, adsorbent dose, and initial pH on the adsorption of methylene blue were measured, and from these experimental data, adsorption isotherms, kinetics, and thermodynamics were obtained. The results showed that a pseudo-second-order kinetic model and Langmuir isotherm (with R2 = 0.937) matched well for the adsorption of methylene blue onto Fe3O4-embedded-MOF. Thermodynamic parameters including free energy, enthalpy, and entropy of methylene blue adsorption were calculated, and the results showed that the adsorption of methylene blue were favorable on Fe3O4-embedded-MOF. The magnetic hybrid Fe3O4-embedded-MOF material features both magnetic separation characteristics as well as excellent adsorption performance for methylene blue in aqueous solution. The results of the present study demonstrate that Fe3O4-embedded-MOF is a promising adsorbent for the removal of dye from wastewater.
We report the synthesis of mesoporous alumina by a template method and its applications as a new solid phase extraction adsorbent with abamectin and ivermectin as the target analytes by liquid chromatography-tandem mass spectrometry (LC-MS/MS). Chromatographic separation was conducted on a C18 column using a gradient mobile phase consisting of methanol (solvent A) and 0.2% formic acid in a 5 mmol L−1 ammonium acetate buffer (solvent B) at a flow rate of 0.3 mL min−1. The linearity of the calibration curves was excellent and yielded correlation coefficients (r2 = 0.9990–0.9999) in a range of 0.02–0.50 mg L−1. Samples were spiked with known quantities of the analytes at three different concentration levels (0.05, 0.10 and 0.20 mg L−1), and the recoveries were in the range of 87.3–104.5% with the relative standard deviation (RSD) values ranging between 0.53% and 5.8%. The limits of detections and limits of quantization were 0.16 ng g−1 and 0.53 ng g−1, respectively. These results indicated that mesoporous alumina has enormous potential as a novel solid phase extraction adsorbent material in the food security field.