The collapse problem of transmission tower upon strong winds was well noted in past few years. This article analyses the wind-induced collapse problem of a long-span transmission tower–line system. The member buckling effect was particularly considered. In doing so, a three-dimensional finite element model of the long-span transmission tower–line system was established in ABAQUS based on a practical project. The transmission tower and line were simulated by the frame and truss elements, respectively. The nonlinear behavior of a compressive member was simulated using the Marshall model, and the nonconvergence of numerical calculation was set to be the collapse criterion. The critical wind speed, damage position, and collapse probability were obtained from a collapse analysis of the long-span transmission tower–line system under different wind attack angles. The collapse mechanism of the long-span transmission tower–line system under a wind attack angle of 45° was investigated, and an incremental dynamic analysis was performed to evaluate the collapse-resistant capacity of the transmission tower. The study reveals that the interaction between bending moment and shear deformation is critical to the collapse of transmission tower.
The development of the dry transfer method provides an abundant platform to construct various heterostructures of two-dimensional materials. However, the surface and interface cleanliness are essential to realize high electronical performance of heterostructures devices. Here, we demonstrated thermal annealing effect on the mobility and electrical transport properties of graphene on hexagonal boron nitride heterostructures devices. With different annealing temperature recipes for graphene on hexagonal boron nitride devices, we found annealing temperature at 300 °C can clean resist residual and achieve high mobility. Atomic force microscopy results also present a clean surface and small average root mean square roughness as low as 210 pm. Well defined oscillations and plateaus of electrical transport at low magnetic field indicate a high-quality graphene surface.