3 February 2022 in Nature Communications
Two-dimensional electron gases (2DEGs) with high mobility, engineered in semiconductor heterostructures host a variety of ordered phases arising from strong correlations, which emerge at sufficiently low temperatures. The 2DEG can be further controlled by surface gates to create quasi-one dimensional systems, with potential spintronic applications. Here we address the long-standing challenge of cooling such electrons to below 1 mK, potentially important for identification of topological phases and spin correlated states. The 2DEG device was immersed in liquid 3He, cooled by the nuclear adiabatic demagnetization of copper. The temperature of the 2D electrons was inferred from the electronic noise in a gold wire, connected to the 2DEG by a metallic ohmic contact. With effective screening and filtering, we demonstrate a temperature of 0.9 ± 0.1 mK, with scope for significant further improvement. This platform is a key technological step, paving the way to observing new quantum phenomena, and developing new generations of nanoelectronic devices exploiting correlated electron states.
15 July 1996 in Physical Review B
Variable-range hopping (VRH) conductance fluctuations in the gate-voltage characteristics of mesoscopic gallium arsenide and silicon transistors are analyzed by means of their full distribution functions (DF’s). The forms of the DF predicted by the theory of Raikh and Ruzin have been verified under controlled conditions for both the long, narrow wire and the short, wide channel geometries. The variation of the mean square fluctuation size with temperature in wires fabricated from both materials is found to be described quantitatively by Lee’s model of VRH along a one-dimensional chain. Armed with this quantitative validation of the VRH model, the DF method is applied to the problem of magnetoconductance in the insulating regime. Here a nonmonotonic variation of the magnetoconductance is observed in silicon metal-oxide-semiconductor field-effect transistors whose sign at low magnetic fields is dependent on the channel geometry. The origin of this effect is discussed within the framework of the interference model of VRH magnetoconductance in terms of a narrowing of the DF in a magnetic field. © 1996 The American Physical Society.
19 October 2020 in Applied Physics Letters
To cool a high mobility two-dimensional electron gas (2DEG) at a GaAs–AlGaAs heterojunction to milliKelvin temperatures, we have fabricated low resistance Ohmic contacts based on alloys of Au, Ni, and Ge. The Ohmic contacts have a typical contact resistance of at 4.2 K, which drops to below 0.9 K. Scanning electron microscope images establish that the contacts have the same inhomogeneous microstructure that has been observed in previous studies. Measurements of the contact resistance , the four-terminal resistance along the top of a single contact, and the vertical resistance RV all show that there is a superconductor in the Ohmic contact, which can be turned completely normal with a magnetic field of 0.15 T. We briefly discuss how this superconductivity may be affecting the electrical transport measurements of 2DEGs, especially how it may hinder the cooling of electrons in a 2DEG below 0.1 K.
1 July 1996 in Surface Science
12 January 2026 in Applied Physics Letters
We present measurements of the cooling length ℓE for hot electrons in a GaAs-based high-mobility two-dimensional electron gas. The thermal measurements are performed on a long 60 μm-wide channel, which is Joule-heated at one end, along which there are three similar hot-electron thermocouples, spaced 30 μm apart. The thermocouples measure an exponentially decaying temperature profile with a characteristic length ℓE, which decreases from 23 to 16 μm as the lattice temperature increases from 1.8 to 5 K. From a simple one-dimensional model of heat diffusion, we measure an inelastic scattering time, which decreases from τi≈360 to 180 ps. The measured τi has a magnitude and temperature dependence consistent with acoustic phonon scattering times. We discuss how the sample design can be varied for further thermal investigations. Knowledge of the temperature profile and its gradient will prove useful in measurements of the thermal conductivity and the Nernst effect.