18 March 2024 in Optics & Laser Technology
11 August 2025 in Optics Express
Coarse wavelength division multiplexing (CWDM) systems are widely used in telecommunications and data center interconnects. The polarization-sensitive characteristics of the demultiplexer at the receiving end lead to significant optical power loss in the signal transmission link and increase the complexity of the packaging process. In this work, a 4-channel polarization-independent arrayed waveguide grating (AWG) was designed for CWDM systems, which was realized by ridge waveguides on the SOI platform with 3-µm-thick top Si. Compared with the conventional ridge waveguide with a dual-surface structure, the quasi-single-mode ridge waveguide was designed with a single-surface structure and fabricated by a simple one-step dry etching process. The AWG device performed well while working in O-band. The fabricated demultiplexers were experimentally measured to have minimum insertion losses of 0.68 dB, channel crosstalk of better than −19 dB, and polarization-dependent loss of 0.31 dB.
10 March 2025 in Results in Optics
1 October 2024 in Optical Engineering
A high-speed receiver optical subassembly (ROSA) based on silica hybrid-integrated technology for 400 G Ethernet applications is designed and manufactured. It consists of an eight-channel-arrayed waveguide grating (AWG) with a 2% refractive index difference, two 4-channel InP-based waveguide photodetector (PD) array chips, eight lenses for enhancing the coupling between AWG and PDs, two 4-channel trans-impedance amplifier array chips, and an eight-channel high-frequency flexible printed circuit. All the channels of the ROSA have achieved 3 dB bandwidths of above 27.05 GHz, and receiver sensitivities of below −8.5 dBm, supporting a receiving rate of 8×53 Gbps.
15 August 2023 in Applied Optics
An asymmetric Mach–Zehnder interferometer (AMZI) is an essential device to generate pulse pairs in quantum key distribution systems. An AMZI based on a dual-chip coupling structure in a silica-on-silicon planar light wave circuit platform is proposed, which includes a variable optical splitter (VOS), a delay line (DL), and a directional coupler (DC). The AMZI chip is divided into a VOS-DL part and a DC part, and the two parts are independently manufactured and then coupled. Since the DC part occupies the smallest area of the AMZI chip and is most sensitive to manufacturing errors, separate production can reduce the process difficulty and fabrication errors. In the experiment, balanced pulse pairs with a delay time of 402 ps are obtained in the condition of single photon transmission, and the excess loss is 0.8 dB. This dual-chip coupling structure can improve the yield and reduce the manufacturing cost when producing large chips.
19 April 2025 in Journal of Optics