Onyemazuwa Andrew Azaka

Onyemazuwa Andrew Azaka

Auto-generated profile, based on publicly available information

Onyemazuwa Andrew Azaka

Department of Mechanical Engineering, Nnamdi Azikiwe University, Awka, Anambra state, Nigeria

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 February 2021 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
PDF file
OEObiora Nnaemeka Ezenwa
Obiora Nnaemeka Ezenwa
EOEchezona Nnaemeka Obika
Echezona Nnaemeka Obika
OAOnyemazuwa Andrew Azaka
Onyemazuwa Andrew Azaka
ENEmmanuel Chinagorom Nwadike
Emmanuel Chinagorom Nwadike
This work presents the use as a filler of carbonized breadfruit seed coat and recycled low density polyethylene as the binder in ceiling board manufacturing. The depulped bread fruit seed was carbonized for 2 h at a temperature of 500°C. The experimental design was set up using the Design Expert software. A total of 30 experimental tests were developed for four parameters and three responses. The parameters are carbonized bread fruit seed coat/recycled Low Density Polyethylene mass ratio (filler-binder mass ratio), compaction time, compaction temperature and compaction pressure while the responses are thermal conductivity, thickness swell and water absorption. The models developed have been validated using the Study of Variance (ANOVA). Using the 3D surface map, the influence of the parameters on the responses was studied. The optimization method of the Design Expert program was used to evaluate the optimal level of the parameters that will produce the best possible result from their combination. The result gave optimal values of 16.206% filler/rLDPE, 9.406minutes compaction time, 200°C compaction temperature and 11 MPa compaction pressure, which gave 0.246% Water Absorption, 1.998% Thickness Swell and 2.898 W/M.K Thermal Conductivity.

27 March 2021 in Journal of Engineering Research and Reports
Verified
Journal Article
Closed access
PDF file
PEPondi Pius Eddy
Pondi Pius Eddy
NCNwigbo Solomon Chuka
Nwigbo Solomon Chuka
OOObende Eziekel Omeiza
Obende Eziekel Omeiza
OCOlisakwe Henry Chukwuemeka
Olisakwe Henry Chukwuemeka
CPChikelu Okechukwu Peter
Chikelu Okechukwu Peter
AAAzaka Onyemazuwa Andrew
Azaka Onyemazuwa Andrew
The durability of a machine structure is based on its mechanical performance through its entire service life. To avoid structural failures in machines, it is a standard design practice that machines be analyzed based on the types of loading (static and fatigue) associated with it in order to design safe and dependable machine structures. These types of analyses are performed with the purpose of estimating the behavior of the mechanical parts under specific operational conditions. The aim of this research is to investigate the effect of different loading to the maximum load on the redesigned shafts of an existing cassava peeling machine capable of peeling at least one (10) tons of cassava tubers with different weight, size or shape per day to ascertain the effects on the bending moment, shear force, deflection angle, shear stress and bending stress, and evaluate if there is need to reduce or increase the thickness of the shafts to a standard considered to be safe and economical. The three shafts of the cassava peeling machine have been carefully analyzed to check for their fatigue life under different loading conditions. From the analysis, with stress values of 48.640MPa, 49.1289MPa, 3.06089MPa and shaft diameter values of 34.6799mm, 34.7955mm, 13.7941mm evaluated from the reduced stress diagrams and ideal diameter diagrams for abrasive cylinder shaft, peeling cylinder shaft, and retainer shaft respectively, gave positive results because none of stress values were greater than reduced stresses (calculated stress value from Tresca’s theory) on the respective shafts. Therefore, a standard steel shaft of 35mm diameter is appropriate for manufacturing of the machine and also safe and economical.

1 September 2020 in Heliyon
Verified
Journal Article
Open access
JDJude Ezechi Dara
Jude Ezechi Dara
COChristian Munachiso Odazie
Christian Munachiso Odazie
POPaul Chukwulozie Okolie
Paul Chukwulozie Okolie
AAAndrew Onyemazuwa Azaka
Andrew Onyemazuwa Azaka
The economy runs on energy and quest for development means that more energy is needed. Statistics show that the majority of energy comes from burning fossil fuels, and they pollute our environment. This work is aimed at producing a mechanical speed breaker electricity generator that operates on two actuating strokes. It converts the linear motion of the rack gear that is depressed by the vehicular movement to rotary motion of the pinion gear keyed on the shaft and alternator. The machine gets actuated by compression and release of the springs, thus increasing the output of the machine. It consists of a stable frame, dome-shaped top, rack and pinion mechanism, chain and sprocket mechanism, freewheels, springs, flywheel, shafts, an alternator and a deep cycle battery. The design was carried out using engineering principles with due consideration to cost, serviceability, ease of operation, durability and performance. It is designed to be actuated by vehicles weighing 1,600kg (400kg per wheel) and a prototype rated 100kg was built. Tests were performed to determine the performance of the machine and the results showed that the speed breaker could produce a rotary speed of 1500 rpm at the alternator, thereby generating 204W of electrical power per cycle. The machine conversion efficiency was about 88.7%.

6 May 2022 in Cleaner Chemical Engineering
Verified
Journal Article
Open access
ENEmmanuel Chinagorom Nwadike
Emmanuel Chinagorom Nwadike
JNJoseph Tagbo Nwabanne
Joseph Tagbo Nwabanne
MAMatthew Ndubuisi Abonyi
Matthew Ndubuisi Abonyi
OAOnyemazuwa Andrew Azaka
Onyemazuwa Andrew Azaka