Wilhelmus J. Geerts

Wilhelmus J. Geerts

Auto-generated profile, based on publicly available information

Wilhelmus J. Geerts

Department of Physics, Texas State University 1 , San Marcos, Texas 78666, USA

Research Focus & Metrics

Academic Career Length

24Years (2003-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 February 2017 in AIP Advances
Verified
Journal Article
Open access
PDF file
JPJohn E. Petersen
John E. Petersen
FTFidele Twagirayezu
Fidele Twagirayezu
LSLuisa M. Scolfaro
Luisa M. Scolfaro
PBPablo D. Borges
Pablo D. Borges
WGWilhelmus J. Geerts
Wilhelmus J. Geerts
Antiferromagnetic NiO is a candidate for next generation high-speed and scaled RRAM devices. Here, electronic and optical properties of antiferromagnetic NiO: Fe 25% in the rock salt structure are studied and compared to intrinsic NiO. From density of states and complex dielectric function analysis, the first optical transition is found to be at lower frequency than intrinsic NiO due to an Fe impurity level being the valence band maximum. The resulting effects on refractive index, reflectivity, absorption, optical conductivity and loss function for Fe-doped NiO are compared to those of intrinsic NiO, and notable differences are analyzed. The electronic component of the static dielectric constant of NiO: Fe 25% is calculated to be about 2% less than that of intrinsic NiO.

1 March 2022 in AIP Advances
Verified
Journal Article
Open access
PDF file
ABAmanda de Oliveira Barros
Amanda de Oliveira Barros
MKMd Nayeem Hasan Kashem
Md Nayeem Hasan Kashem
DLDaniel Luna
Daniel Luna
WGWilhelmus J. Geerts
Wilhelmus J. Geerts
WLWei Li
Wei Li
JYJames Yang
James Yang
Flexible materials embedded with hard magnetic particles have recently gained widespread recognition as small-scale actuators due to their capacity to be a rapid and precise shape-shifting material. Strontium ferrite (SrFe12O19) particles have been shown as a great candidate for such applications, since it is an inert hard magnetic material that, in contrast to barium ferrite and neodymium, is also biocompatible. The preparation of such material is done by mixing the magnetic particles into the uncured elastomer (polydimethylsiloxane (PDMS)), in liquid form, and then pouring the mixture in a mold for curing. If the samples are subjected to a magnetic field during the curing process, chains of particles are formed in the direction of the applied field, thus creating an easy axis in this same direction. The magnetic properties of such composite cannot yet be found in literature. In this study, we analyzed three concentrations of strontium ferrite particles in PDMS under three field configurations, resulting in 9 different samples. The concentrations used were 1:1, 2:1, and 4:1 ratios of PDMS to strontium ferrite per weight. All three types of samples were cured either in a zero magnetic field, or over the north pole of a neodymium permanent magnet, or over the side of said magnet. A biaxial vibrating sample magnetometer (VSM) was used to measure hysteresis curves parallel and perpendicular to the curing field. The samples cured in a field show a squareness ratio of up to 0.94 while the samples cured in zero field, only close to 0.5. The samples cured in a field show a magnetic anisotropy with an easy axis parallel to the curing field. Harvesting these modified properties, a mobile robot manufacturing method is proposed that bypasses the need of applying a high intensity magnetic field.

15 May 2003 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
CGClaude Garrett
Claude Garrett
PHPatrick Holland
Patrick Holland
WGWilhelmus J. Geerts
Wilhelmus J. Geerts
DRDustin Ragan
Dustin Ragan
ADArchana Dubey
Archana Dubey
ABAnup K. Bandyopadhyay
Anup K. Bandyopadhyay
The magnetic hysteresis of dc magnetron-sputtered Ni69Fe31 films that were sandwiched between titanium layers was investigated as a function of an externally applied isotropic in-plane strain. The hysteresis curves were measured with a Kerr magnetometer that monitored the longitudinal Kerr ellipticity as a function of the in-plane magnetic field. The strain was created by bending the samples in two dimensions using a pressure cell. Measurements were performed on films with different thicknesses. The magnetoelastic properties appeared to be much smaller for films with a thickness of 100 nm than for films with a thickness of 288 or 500 nm. This might be due to a change of the domain wall pinning, or a change of the domain wall density as a function of the film thickness. Measurements under compressive isotropic in-plane stress were shown to be possible by flipping the sample in the pressure holder and measuring through the glass substrate. The Faraday effect and stress-induced birefringence in the glass substrate did not hinder the accumulation of noiseless hysteresis data. The magnetoelastic effects appeared to be different for positive and negative values of the applied stress.

27 February 2023 in Journal of Magnetism and Magnetic Materials
Verified
Journal Article
Closed access
AHAbdul Halim
Abdul Halim
SKSUBRATA KARMAKAR
SUBRATA KARMAKAR
SDSree Sourav Das
Sree Sourav Das
WGWilhelmus J. Geerts
Wilhelmus J. Geerts
AHAriful Haque
Ariful Haque
GBGary W. Beall
Gary W. Beall

1 February 2024 in AIP Advances
Verified
Journal Article
Open access
PDF file
MKMandesh Khadka
Mandesh Khadka
OAOluwasola K. Arigbabowo
Oluwasola K. Arigbabowo
JTJitendra S. Tate
Jitendra S. Tate
WGWilhelmus J. Geerts
Wilhelmus J. Geerts
Magnetic Field Assisted Additive Manufacturing (MFAAM), 3D printing in a magnetic field, has the potential to fabricate high magnetic strength anisotropic bonded magnets. Here, 10, 35, and 54 wt% strontium ferrite bonded magnets using polyamide 12 binder were developed by twin screw compounding process and then printed via MFAAM samples in zero, and in 0.5 Tesla (H parallel to the print direction and print bed). The hysteresis curves were measured using a MicroSense EZ9 Vibrating Sample Magnetometer (VSM) for 3 different mount orientations of the sample on the sample holder to explore the magnetic anisotropy. The samples printed in zero field exhibited a weak anisotropy with an easy axis perpendicular to the print direction. This anisotropy is caused by the effect of shear flow on the orientation of the magnetic platelets in the 3D printer head. For the MFAAM samples, the S values are largest along the print bed normal. This anisotropy is caused by the field. The alignment of the magnetic particles happens when the molten suspension is in the extruder. When the material is printed, it is folded over on the print bed and its easy axis rotates 90° parallel to the print bed normally. Little realignment of the particles happens after it is printed, suggesting a sharp drop in temperature once the composite touches the print bed, indicating that field-induced effects in the nozzle dominate the anisotropy of MFAAM deposited samples.

16 August 2019 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
JSJames Shook
James Shook
PBPablo D. Borges
Pablo D. Borges
LSLuisa M. Scolfaro
Luisa M. Scolfaro
WGWilhelmus J. Geerts
Wilhelmus J. Geerts
First principles band structure calculations are employed to perform a comprehensive study of the electronic and optical properties of the 2H-phase XTO2 (X = Cu, Ag; T = Al, Cr) delafossites, and the effects on those properties due to Cu, Ag, and O vacancies, as well as p-type doping with magnesium. From the band structures, the frequency-dependent real and imaginary parts of the complex dielectric function, ϵ(ω) , are obtained, together with refractive index, extinction coefficient, optical conductivity, reflectivity, absorption coefficient, and energy loss function. Moreover, hole effective masses are calculated for all systems and are shown to be highly anisotropic. Comparisons between the results obtained in this work and previous experimental and other theoretical results are made, when available. X vacancies and Mg doping are predicted to only marginally affect the transparent character, but are also predicted to increase the hole effective mass. O vacancies are predicted to lower the hole effective mass, but at the cost of increased absorption in the optical portion of the spectrum, harming transparent character.