A 1.89-GHz bandwidth, 175-kHz resolution spectral analysis system-on-chip (SoC), integrating a subsampling analog-to-digital converter (ADC) frontend with a digital reconstruction backend and implementing a 21 600-point sparse Fourier transform based on the fast Fourier aliasing-based sparse transform (FFAST) algorithm has been co-designed by using the Constructing Hardware in a Scala Embedded Language (Chisel) and Berkeley Analog Generator (BAG) circuit generator frameworks in 16-nm CMOS. Three sets of 25×, 27×, and 32× subsampling successive approximation register (SAR) ADCs acquire signal with ~5.4-6.3 effective number of bits (ENOB)/slice. The digital backend consists of mixed-radix 864-, 800-, and 675-point fast Fourier transforms (FFTs), a signal location estimator, and a peeling decoder that recovers aliased signals from a sparsely populated spectrum. A single-issue, in-order, fifth-generation reduced instruction set (RISC-V) Rocket processor interacts with the spectrum analyzer for post-processing and calibration. The ADC consumes 49.8 mW with a 3.78-GHz reference clock. At 400 MHz and 0.7-V digital supply voltage (VDD), the Rocket core and the FFAST digital signal processing (DSP) together consume 133.5 mW.
This paper demonstrates a CMOS digital polar transmitter with flip-chip interconnection to low-temperature co-fired ceramic (LTCC) interposers. The LTCC interposers contain the PA output balun targeting different operating frequency bands, and the reconfiguration in the carrier frequency is achieved by selecting an appropriate LTCC interposer. The same CMOS core transmitter is reused for different frequency bands. In this design, an output power higher than 22 dBm from 0.6 to 2.4 GHz is demonstrated, with peak power of 27.1 dBm and peak efficiency of 52%. The polar transmitter includes 9-bit phase interpolation and 8-bit amplitude modulation, suitable and verified as a multi-standard universal digital modulator.