21 September 2017 in Polímeros
EBEdson Cocchieri Botelho
CBCirlene Fourquet Bandeira
Cirlene Fourquet Bandeira
This review provides valuable information about the general characteristics, processing conditions and physical properties of carbon nanotube buckypaper (BP) and its polymer composites. Vacuum filtration is the most common technique used for manufacturing BP, since the carbon nanotubes are dispersed in aqueous solution with the aid of surfactant. Previous works have reported that mechanical properties of BP prepared by vacuum filtration technique are relatively weak. On the other hand, the incorporation of polymer materials in those nanostructures revealed a significant improvement in their mechanical behavior, since the impregnation between matrix and BP is optimized. Electrical conductivity of BP/polymer composites can reach values as high as 2000 S/m, which are several orders of magnitude greater than traditional CNT/polymer composites. Also, BP can improve remarkably the thermal stability of polymer matrices, opening new perspectives to use this material in fire retardant applications.
1 March 2019 in Materials & Design
17 December 2013 in Materials Research
The non-isothermal thermogravimetric methods have been used extensively for the determination of kinetic parameters in polymers. The poly (ether ketones) are used as matrix in advanced high performance composites due its high thermal stability, excellent environmental performance and superior mechanical properties. In this work, the non-isothermal decomposition kinetics of the polymer poly (ether ether ketone) (PEEK) was evaluated in nitrogen and synthetic air atmospheres, using the Flynn-Wall-Ozawa and Coats Redfern models. The results showed that the necessary time for the material decomposes in 5% is approximately 216 years if it is submitted to temperatures of 350 °C in nitrogen atmosphere. On the other hand, if the material is submitted to air atmosphere, this decomposition time drops to about 1,05 years in the same temperature and for the same conversion rate. The decomposition kinetics study by Coats Redfern showed that the D3 mechanism (three-dimensional diffusion (Jander equation)) had better adjustment to the decomposition kinetics of the material in nitrogen atmosphere, while in synthetic air the R1 mechanism (phase boundary controlled reaction (one-dimensional movement)) has better adjustment to the decomposition kinetics of the material.
16 January 2020 in Polymer Engineering & Science
EBEdson Cocchieri Botelho
MRMirabel Cerqueira Rezende
Mirabel Cerqueira Rezende