In this paper, a kind of quasi-zero stiffness isolator with cam-roller nonlinear spring mechanism as negative stiffness mechanism is studied by sinusoidal sweep frequency experiment, sinusoidal constant frequency experiment and half-sinusoidal impact experiment. The dynamic response characteristics and impact resistance of quasi-zero stiffness isolator are analyzed. The experimental results show that when the excitation is constant, the dynamic response of the quasi-zero stiffness isolation system has a response peak, and the response acceleration and displacement all increase first and then decrease with the increase of frequency. When the excitation amplitude increases, the initial isolation frequency becomes large and the effective isolation bandwidth becomes narrow. For the half-sinusoidal acceleration impact with the pulse width less than 10ms and excitation acceleration less than 13.0g, the quasi-zero stiffness isolation system has excellent isolation and cushioning performance.
The description of the correction The author numbering was incorrect in the paper originally submitted and finally approved (after the acceptance) by the Authors.
15 April 2019 in IOP Conference Series: Materials Science and Engineering
Track structure is modelled as an Euler beam that is supported by a series of discrete points. Further, the governing equations of the track structure subjected to moving harmonic excitation are established. On the basis of the dynamical characteristics and principle of superposition in frequency domain of periodic structure subjected to moving harmonic excitation, for any point, theoretical expression of the amplitude-frequency response is derived. Consequently, the nature characteristic and the effects of fasteners damping on dynamical characteristics of track structure subjected to moving harmonic excitation are investigated. The researches reveal that influences of damping on resonant peak bandwidth and peak value of the track structure are no obvious. While the effects of damping on dynamic response are very obvious on non-resonant high frequency band, and with the increasing of damping the dynamical responses of the track structure obviously decrease. The dynamic characteristics of the fastener bearing points and the midpoint on track structure are almost similarity, while there is a certain difference only in the frequency range far away from the excitation frequency.