In this research work, we investigated the effects of a broad set of materials properties and external operating parameters on the opto-electrical output of a hybrid RbGeI3-based perovskite solar cell (PSC) as a means of enhancing its performance. We first performed a judicious numerical modelling of the reference cell with the following structure FTO/TiO2/RbGeI3/Spiro-OMeTAD/Ag, with data retrieved from the experiment. SCAPS program enables to model the device, considering charge carriers transport governing equations. Investigations are directed on addressing the current challenges that include thinner, less environmentally harmful, cost-effectiveness, and more stable solar devices over time. Analysis of the effects of different hole transport material (HTM) on current–voltage (J-V) and external quantum efficiency (QE) characteristics, helps to identify CuI as an ideal HTM. Optimal cell output were achieved by investigating the effects of metal contact work function, defect states, RbGeI3 thickness, light transmission/reflection at the front/back contact, as well as operating temperature. As a result, efficiency increased significantly from 10.11 to 18.10%, and fill factor that represents a stability indicator, increased from 63.68 to 76.95%. Moreover, an optimum open-circuit voltage Voc = 0.70 V and a high short-circuit current density of Jsc = 33.51 mA/cm2 were recorded. An additional study on the capture cross-section of charge carriers ( $${\sigma }_{n,p}$$ ) on PV characteristics, enabled to achieve a power conversion efficiency (PCE) of 29.71% and FF of 88% at a value of $${\sigma }_{n,p}$$ selected to be 10–22 cm2. This contribution aims at designing and producing thinner, more efficient, more stable and more environmentally clean and economically viable PSCs.
In this research article, we carry out investigation on compensating the efficiency loss in thin-film CIGS photovoltaic (PV) cell due to absorber coat depth reduction. We demonstrate that the efficiency loss is mainly caused by the disruption of the charge-carrier transport. We propose an architecture engineered with a stepped band gap profile for improving the efficiency of charge-carrier transport and collection. By modifying the gallium content, we tuned the band gap profile of the active layer of a reference experimental cell from which we previously collected all parameters. Using the simulator environment SCAPS-1D, we modeled a three-steps stacking profile of active layer with different gallium contents from one layer to another. Based on the results obtained, the band gap configuration herein proposed appears to be a prospective strategy for high-performance ultrathin Cu(In,Ga)Se2-based PV cell architecture engineering. By combining this approach with the optimization of the active layer doping, we enhanced the yields of the reference structure from 18.93% for a 2 μm active layer to 23.36% for only 0.5 μm thickness of active layer, that is, an enhancement of 4.4%. The fill factor increased from 73.24 to 81.73%, that is, an additional stability indicator value of 8.5%. The good values of the obtained efficiency and the improvement of the fill factor value are relevant indicators of a stable device. Active layer stacking combined with a stepped band gap profile and doping level optimization is definitely providing new perspectives in thin-film CIGS high-performance PV cell achievement.