15 June 2016 in Advanced Energy Materials
21 January 2009 in Nano Letters
CPChandrashekhar Pendyala
30 April 2014 in ACS Applied Materials & Interfaces
5 April 2012 in Journal of Materials Chemistry
Hollow core–shell structured porous Si–C nanocomposites with void space up to tens of nanometres are designed to accommodate the volume expansion during lithiation for high-performance Li-ion battery anodes. An initial capacity of ∼760 mA h g−1 after formation cycles (based on the entire electrode weight) with ∼86% capacity retention over 100 cycles is achieved at a current density of 1 A g−1. Good rate performance is also demonstrated.
20 March 2012 in Nano Letters
16 May 2013 in Journal of Materials Chemistry A
Li–S batteries are a complicated system with many challenges existing before their final market penetration. While most of the reported work for Li–S batteries is focused on the cathode design, we demonstrate in this work that the anode consumption accelerated by corrosive polysulfide solution also critically determines the Li–S cell performance. To validate this hypothesis, ionic liquid (IL) N-methyl-N-butylpyrrolidinium bis(trifluoromethylsulfonyl)imide (Py14TFSI) has been employed to modify the properties of the SEI layer formed on the Li metal surface in Li–S batteries. It is found that the IL-enhanced passivation film on the lithium anode surface exhibits very different morphology and chemical composition, effectively protecting lithium metal from continuous attack by soluble polysulfides. Therefore, both the cell impedance and the irreversible consumption of polysulfides on lithium metal are reduced. As a result, the Coulombic efficiency and the cycling stability of Li–S batteries have been greatly improved. After 120 cycles, the Li–S battery cycled in the electrolyte containing 75% IL demonstrates a high capacity retention of 94.3% at 0.1 C rate. These results reveal one of the main failure mechanisms in Li–S batteries and shine the light on new approaches to improve the reversible capacity and cyclability of Li–S batteries. This work provides important clues for the understanding and thus the improvement of Li–S battery systems through a different point of view.