1 February 2025 in AIP Advances
Dissolvable polymeric microneedles have gained significant attention in recent years as a promising transdermal drug delivery method due to their simple fabrication and lack of medical waste after use. However, traditional polymeric microneedles possess several notable drawbacks, including insufficient mechanical strength, difficulty in effectively penetrating the skin barrier, limited drug loading capacity affecting therapeutic outcomes, and uncontrollable drug release rates leading to unstable efficacy. In this paper, a conductive polymer microneedle with an adjustable dissolution rate is proposed. The dissolution rate of microneedles can be adjusted by controlling the current so as to control the drug release rate and realize the controlled drug release truly. The PVA-Ag and PVP-Ag lidocaine-loaded microneedles demonstrated good puncture performance and nearly complete dissolution within 10 min in a simulated body fluid environment. The dissolution rate was significantly accelerated under electrical stimulation. The microneedles showed good biocompatibility, and under the application of a 3 V voltage, the drug delivery efficiency of PVP-Ag lidocaine microneedles reached 85% within 5 min, while PVA-Ag lidocaine microneedles achieved up to 90%.
1 January 2023 in Journal of Renewable Materials
Realization of CO2 resource utilization is the main development direction of CO2 reduction. The CO2 methanation technology based on microbial electrolysis cell (MEC) has the characteristics of ambient temperature and pressure, green and low-carbon, which meets the need of low-carbon energy transition. However, the lack of the system such as the change of applied voltage and the reactor amplification will affect the methane production efficiency. In this research, the efficiency of methane production with different applied voltages and different types of reactors was carried out. The results were concluded that the maximum methane production rate of the H-type two-chamber microbial electrolysis cells (MECs) at an applied voltage of 0.8 V was obtained to be 1.15 times higher than that of 0.5 V; under the same conditions of inoculated sludge, the reactor was amplified 2.5 times and the cumulative amount of methane production was 1.04 times higher than the original. This research can provide a theoretical basis and technical reference for the early industrial application of CO2 methanation technology based on MEC.