Haptic devices are applied as masters to provide force displays for telemedicinal robots. Gravity compensation has been proven to be crucial for the accuracy and capability of force displays, which are critical for haptic devices to assist operators. Therefore, the existing method suffers from an unsatisfactory effect, a complex implementation, and low efficiency. In this paper, an approach combining active and passive gravity compensation is proposed to improve the performance of a force display. The passive compensation is conducted by counterweights fixed with the moving platform and pantographs to offset most of the gravity and reduce the loads of the motors, while the peak capability of the force display is enhanced. The required weight is optimized by a multi-objective genetic algorithm in terms of the maximum torque of the motors in the global workspace. As a supplement, the residual gravity is eliminated by active compensation to extend the accuracy of the force display. The balancing forces in the discretized workspace are entirely calibrated, and the required force for the arbitrary configuration is calculated by interpolations. The decisions regarding the algorithm parameters are also discussed to achieve a compromise between the effect and elapsed time. Finally, the prototype with a compensation mechanism is implemented and experiments are carried out to verify the performance of the proposed method. The results show that the peak capability of the force display is enhanced by 45.43% and the maximum deviation is lowered to 0.6 N.
18 January 2024 in IEEE Robotics and Automation Letters
Passive compensation has been proven to be effective in reducing gravitational joint loads and improving the output capability of mechanisms. Existing methods for passive compensation are not satisfactory in terms of mechanism complexity and implementation convenience, while cases with variable angular orientations are more complicated. This letter presents a feasible design to achieve approximate compensation for multi-DOF parallel mechanisms with both translations and orientations. The counterweights employed to provide vertical forces are connected with the moving platform by 2T1R stands and pantographs as external components. Conventional approaches using springs or counterweights in the chains are also calculated for comparisons. By contrast, the proposed method is easy to be realized and possesses strong robustness to orientations. Finally, an experimental prototype is implemented to verify the performance. The results show that the maximum torques and energy consumption are reduced by 49.44% and 78.08% for the translation mechanism, respectively, and by 35.77% and 43.43% for the rotation mechanism.
20 April 2026 in IEEE Robotics and Automation Letters
Stable and precise force contact is critical in human-robot interaction, typically requiring precise sensors and advanced algorithms. This paper presents a novel adjustable constant-force mechanism (CFM) serving as a force generator for massage robotic systems, aiming to reduce hardware costs and system development complexity. The passive CFM, comprising gears and springs, is further integrated with an active motor to enable online adjustment and continuous operation. As the primary innovation, the harmonic principle is employed for force regulation in the CFM, replacing traditional methods such as altering the number or assembly position of springs, which provides a more convenient integration with automated systems. This involves the superposition of two elastic systems with identical configurations, where only the phase angle is extracted as the sole control variable for force modulation. A prototype was constructed to experimentally validate its performance. Results demonstrate that the proposed solution achieves a maximum constant output force of 18.34 N over a 55 mm range, and it can be adjusted online to the appropriate level as required by the task.