11 January 2025 in Transactions of the Indian Institute of Metals
11 February 2020 in Proceedings of the Voronezh State University of Engineering Technologies
Scientific interest in the processes of forming the structure of magnetic spinels and composites based on them is due to the possibility of synthesis of materials with multifunctional properties. The process of formation of cobalt (II) nanocrystalline ferrite and CoFe2O4/C composite material is studied. The mechanism of formation of structure of materials including a stage of formation of hydroxides of transition elements, precursors on the basis of complex connections of cations of iron and cobalt with citric acid and their subsequent destruction at heating is offered. The synthesized materials were characterized by x-ray phase analysis, electron microscopy, low-temperature nitrogen adsorption, Debye-Scherrer methods. It is shown that cobalt (II) ferrite has a developed surface, the value of the surface area according to the BET method is 16 m2/g, the average size of the crystallites determined by the Debye-Scherrer equation is 4.0 nm. Activated carbon with a specific surface area of 685 m2/g was used to prepare the composite material. The resulting composite material has a surface area of 222 m2/g, the average crystallite size of 1.1 nm. Cobalt (II) ferrite, included in the composition of the composite material CoFe2O4/C, has a slightly higher value of the lattice parameter, compared with pure cobalt (II) ferrite, which is associated with a decrease in the degree of spinel inversion. The synthesized composite material was tested in the process of adsorption of copper (II) cations from an aqueous solution. It is shown that CoFe2O4/C exhibits an increased adsorption capacity for copper (II) cations in comparison with pure activated carbon, despite a decrease in the specific surface area. The result is explained by the involvement of cobalt (II) ferrite in the adsorption process. The obtained materials may be of interest as catalysts, adsorbents.
1 December 2025 in Journal of the Electrochemical Society
A significant methodological aspect frequently overlooked in the discussion of the electrocatalytic characteristics of nanodispersed materials based on metals and metal oxides is the transformation of their phase composition and microstructure during electrochemical pre-treatment. Through the example of Pd-PdO/C electrocatalysts, which exhibit distinct microstructures and varying amounts of PdO, we demonstrated that under the same pre-treatment conditions, achieved by cyclic scanning of the working electrode potential, the Pd-PdO/C electrocatalytic systems exhibited a progressive reduction of the PdO phase. Following pre-treatment, both catalysts demonstrated the same CO-stripping behaviour, irrespective of their phase and microstructural state in the as-prepared condition. The results obtained highlight (i) the potential for error in interpreting pre- and post-electrochemical characterisation of metal/metal oxide-based electrocatalysts and (ii) the necessity of establishing principles to select the protocols of electrochemical pre-treatment for each specific electrocatalytic system.
22 April 2026 in SSRN Electronic Journal
The electrochemical system of a silver-aqueous-based electrolyte was examined for temperature dynamics during pulse electrolysis. The temperature of a silver-aqueous-based electrolyte electrochemical system was observed under pulsed electrolysis conditions utilizing resistance temperature detectors. The temperature effects observed in the quasi-stationary layer of this electrochemical system are influenced by the electrochemical behavior of silver, which varies according to the anionic composition of the aqueous electrolyte (OH-, CO32-, F-, SO42-, Cl-) and the rate-limiting transfer of reactants within the electrochemical system. The results obtained provide a basis for developing a methodology to study the electrochemistry of metals under pulsed electrolysis conditions, considering the temperature effects that arise. They also enhance the refinement of theoretical models of electrochemical processes, which account for non-stationary electrochemical conditions, and facilitate the integration of new data into established concepts of electrochemistry and materials science.