11 July 2023 in IEEE Transactions on Circuits and Systems I: Regular Papers
In order to obtain a general-purpose real-time simulator that can handle actual analog input and output for a linear time-invariant (LTI) fractional-order system, and also be suitable for MIMO and non-zero initial-state start-up LTI fractional-order systems, this paper presents a method for designing a real-time hardware simulator of non-commensurate fractional-order state-space model (NCFO-SSM) based on FPGA. The numerical approximation of NCFO-SSM for FPGA implementation is given to enhance computing efficiency and reduce the computational complexity of the NCFO-SSM systems. The FPGA implementation of NCFO-SSM is then established to achieve the hardware simulator design of a general purpose for LTI fractional-order systems. To further balance the relationship between the accuracy and the occupancy of FPGA logic resources, a fractional-order Gr $\ddot{\text{u}}$ nwald-Letnikov (GL) operator is proposed based on the piecewise quadratic equation fitting (PWQEF) method. Applications of the proposed PWQEF operator in the NCFO-SSM hardware simulator show that the new hardware simulator can achieve the closest results to theoretical computation. The proposed NCFO-SSM hardware simulator is used to implement fractional-order systems, including a fractional-order PID controller system, an MIMO system, and an H-bridge current source PWM regulator system, to further illustrate its application scope and practicability in LTI fractional-order systems.
20 October 2023 in Journal of the Franklin Institute
9 October 2026 in ISA Transactions
1 January 2026 in IET Control Theory & Applications
This paper investigates the distributed output consensus tracking problem for a class of multi‐agent systems with a nonstrict‐feedback structure and unknown nonlinear functions. Compared with strict‐feedback nonlinear MASs, their nonstrict‐feedback counterparts remain insufficiently studied in the context of distributed control. The main challenge is that the unknown nonlinear functions may depend on the entire state vector of each agent, which complicates backstepping design in a distributed setting. To address this challenge, fuzzy logic systems are incorporated into an adaptive backstepping framework to develop a distributed consensus tracking protocol. A dynamic event‐triggered condition is further integrated into the control design, under which the control input is updated only at triggering instants, thereby reducing the control update frequency. In the presence of bounded external disturbances, Lyapunov analysis proves that the closed‐loop signals are uniformly ultimately bounded. Moreover, the output consensus tracking errors are shown to converge to a compact set containing the origin. In addition, a strictly positive lower bound on the inter‐event intervals is derived, which excludes Zeno behaviour. Simulation results demonstrate the effectiveness of the proposed protocol.
19 November 2026 in Robotica
This paper presents an field-programmable gate array-based implementation of Koopman data-driven model predictive control. The proposed method is applied to robotic manipulators with unknown or partially known nonlinear dynamics. Specifically, a high-dimensional control model for the nonlinear system is established using the extended dynamic mode decomposition method based on input–output data. To implement this, the lifting computation and model predictive control solving are implemented using hardware description languages on Xilinx Kintex-7 XC7K325T operating at 200 MHz, achieving 18.12% look-up table utilization and 3.33% digital signal processor deployment with robust timing closure (4.091 ns critical path, 0.383 ns worst-case negative slack). Finally, end-effector trajectory-tracking experiments were performed on the UR5e robotic manipulator, validating the effectiveness of the controller in real-time robotic manipulator control with deterministic performance.