19 August 2020 in IEEE Transactions on Antennas and Propagation
This paper presents a novel tri-band, dual-polarized and shared-aperture antenna with frequency selective function for Sub-6 GHz base station applications. The proposed antenna is composed of a dual-polarized square loop antenna with two parasitic loops for 2G/3G/4G (1710-2690 MHz) and a differentially fed dual-polarized planar antenna for 5G (3300-3600 MHz and 4800-5000 MHz) base station applications. These two antennas are placed coaxially but different altitude for saving the installation space. In order to achieve good individual performance for these two antennas in the same aperture without interference or blocking, the lower-band (LB) antenna is designed as a frequency selective surface (FSS) for the nether mid/upper-bands (M/UBs) antenna. Measured results show that the proposed antenna achieves a high port isolation (> 20 dB) between LB and M/UBS and a -10-dB impedance bandwidth of 50.4% (1.60-2.70 GHz), 14.9% (3.28-3.80 GHz) and 8.6% (4.75-5.18 GHz), respectively. To further validate the design concept, an antenna array composed of 4 LB elements and 8 M/UBs elements with correspond spacing is fabricated and measured, which demonstrates the application of the tri-band shared-aperture antenna in array form.
1 December 2016 in IEEE Transactions on Antennas and Propagation
A slot helix antenna working in Global Positioning System (GPS) L1 and L2 bands is proposed in this paper. Adopting sequential rotation technique, the proposed antenna is equipped with six helix radiation arms and fed by a microstrip line with folded shape. The whole antenna can be built on a full printed circuit board; so, it is easy to process the proposed antenna. The circularly polarized radiation mechanism of a circular array is analyzed in a new perspective to guide the design. A double-faced slot radiation structure is also established for dual-band operation. Additionally, a traveling wave feeding network suitable for the proposed antenna is presented. The experimental results show that the proposed antenna has good properties in GPS L1 and L2 bands.
11 November 2019 in IEEE Transactions on Antennas and Propagation
A wideband traveling-wave circularly polarized (CP) antenna printed on single-layer PCB for Millimeter-Wave (MM-Wave) applications is presented in this communication. The proposed antenna radiates the CP wave on the basis of the principle similar to the classical endfire-mode helical antenna. The proposed antenna is terminated with an absorber to realize traveling-wave radiation. The traveling-wave working mechanism causes the proposed antenna to have a frequency scanning function and higher stability compared with resonant antennas. Curved microstrip transmission lines are adopted as the CP radiation elements; the whole array antenna is etched on a single-layer substrate. A prototype operating at 30 GHz is fabricated and measured. The radiation beam of the proposed antenna scans from −14.5° (28 GHz) to +22.5° (34 GHz), the axial ratios are lower than 3 dB, and the measured gains show a maximum value of 21.9 dBi at 33 GHz and a minimum value of 20.3 dBi at 28 GHz. The measured |S11| and |S21| are lower than -10 and -16 dB, respectively, in the frequencies mentioned above.
17 October 2022 in IEEE Transactions on Antennas and Propagation
In this paper, a compact shared-aperture dual-band dual-circularly-polarized waveguide antenna array is presented to achieve high gain and wide bandwidth in full-duplex satellite communication at K/Ka-band. The designed antenna array can simultaneously operate at 20 GHz band with right-hand circular polarization (RHCP) radiation and 30 GHz band with left-hand circular polarization (LHCP) radiation. The array is composed of circular polarization (CP) waveguide antenna elements and full-corporate feed networks. The ridged spectrum polarizer is inserted in the square waveguide to form CP radiation in a stepped waveguide antenna element. The sequential rotation technique is adopted in feed networks to further improve CP axial ratio (AR) performance and bandwidth. The prototype of proposed 4×4 antenna array is fabricated and measured for demonstration. Experimental results show that the overlapped bandwidth in terms of reflection coefficients less than -10 dB and AR lower than 2 dB is 18-22 GHz for RHCP radiation in K-band, and the corresponding bandwidth for LHCP radiation in Ka-band is 28-32 GHz. The measured cross-polarization levels are better than 25.82 dB at 20 GHz and 20.25 dB at 30 GHz. And the measured peak gains at K/Ka-band are 23.94 dBic and 26.87 dBic, respectively.
6 November 2018 in IEEE Transactions on Antennas and Propagation
This paper presents the design of dual circularly polarized (CP) series-fed arrays based on Sequential rotation (SR) technique with uniform radiation elements. The radiation elements and feeding network used in the array are uniform, which leads to the possibility of dual-CP radiation by series-fed SR arrays. Meanwhile, the elements radiate unequal powers due to this arrangement. The relationship between the axial ratio (AR) and four key parameters of the array is derived and thoroughly discussed. Good polarization purity and port isolation can be realized by optimizing these parameters. A dual-CP array working at 10 GHz is designed with the help of the analysis. Experimental results show that the proposed antenna has good properties.
17 June 2021 in IEEE Transactions on Antennas and Propagation
This communication presents the design of a wideband circularly polarized (CP) antenna array based on sequential rotation (SR) technique that is excited by a substrate integrated coaxial line (SICL) with mature and stable processing technology for millimeter-wave (mm-wave) applications. Initially, the influence of the amplitude and phase errors of the feeding network on the axial ratio of the CP array is analyzed, and the detailed design scheme of the wideband CP array based on SR technology is summarized, which can be used to design SR CP array with wide bandwidth and high polarization purity. Then, an SICL-fed $4 \times 4$ CP array working in the mm-wave band that is composed of two substrate layers and a bonding film layer is designed. The radiation element is processed with a larger chamfering, which can realize elliptically polarized radiation in a broadband range, and the impedance bandwidth is significantly expanded relative to the working state of linearly polarized and CP, which has a significant impact on the final array working bandwidth enhancement. The feeding network and radiation elements are directly connected in the same plane. Finally, the proposed antenna is processed and measured to verify the theory and design scheme in this communication. Over the frequency range of 25.0–34.0 GHz, the measured 1.5 dB axial ratio bandwidth of the fabricated prototype is 30.5%, and the return losses are less than −10 dB. The maximum measured peak gain is 16.5 dBi.