Rizki Fitria Darmayanti

Rizki Fitria Darmayanti

Auto-generated profile, based on publicly available information

Rizki Fitria Darmayanti

Universitas Jember

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 October 2023 in Heliyon
Verified
Journal Article
Open access
RDRizki Fitria Darmayanti
Rizki Fitria Darmayanti
MMMaktum Muharja
Maktum Muharja
AWArief Widjaja
Arief Widjaja
NWNurul Widiastuti
Nurul Widiastuti
RRRahadian Abdul Rachman
Rahadian Abdul Rachman
BPBambang Piluharto
Bambang Piluharto
Membrane bioreactor (MBR) deteriorates due to fouling on the membrane pores, which can reduce the membrane performance. To reduce membrane fouling, the addition of inorganic filler can enhance the antifouling properties. This study investigates two different membrane preparation by thermally induced phase separation (TIPS) and dip coating methods to modify hollow fiber membrane with Silver Nanoparticles (AgNPs)-Zeolites used in MBR for industrial wastewater treatment. Performance was evaluated by analyzing the flux of water and wastewater, rejection, water content, and antifouling properties. Characterization result represented the synthesized silver nanoparticles had similar diffraction peak with commercial AgNPs, then the micrograph of AgNPs and zeolites addition membrane showed that the inorganic material had an octahedral shape representing zeolite crystal and irregular shape representing AgNPs. The addition of zeolites and AgNPs resulted in satisfying performance, increased flux, rejection, and antifouling properties.

16 January 2021 in Bulletin of Chemical Reaction Engineering & Catalysis
Verified
Journal Article
Open access
PDF file
MMMaktum Muharja
Maktum Muharja
RDRizki Fitria Darmayanti
Rizki Fitria Darmayanti
BPBekti Palupi
Bekti Palupi
IRIstiqomah Rahmawati
Istiqomah Rahmawati
BFBoy Arief Fachri
Boy Arief Fachri
DPDitta Kharisma Yolanda Putri
Ditta Kharisma Yolanda Putri
In this study, the optimization of microwave-assisted alkaline (MAA) pretreatment is performed to attain the optimal operating parameters for the delignification of cocoa pod husk (CPH). The MAA performance was examined by heating the CPH solid with different particle sizes (60–120 mesh) and NaOH solution with a different sample to a solvent (SS) ratio (0.02–0.05 g/L), for short irradiation time (1–4 min). Box-Behnken Design (BBD) was utilized to optimize the percentage of lignocellulose composition changes. The results show that by enlarging particle size, the content of lignin and cellulose decreased while hemicellulose increased. By prolong irradiation time, the content of lignin and hemicellulose decreased while cellulose elevated. On the other hand, increasing the SS ratio was not significant for hemicellulose content changes. From FTIR and SEM characterization, the MAA drove the removal of lignin and hemicellulose of CPH and increased cellulose slightly. Supported by kinetic study which conducted in this work, it was exhibited that MAA pretreatment technology is an effective delignification method of CPH which can tackle the bottleneck of its commercial biofuel production. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

17 October 2020 in Bulletin of Chemical Reaction Engineering & Catalysis
Verified
Journal Article
Open access
PDF file
MMMaktum Muharja
Maktum Muharja
NFNur Fadhilah
Nur Fadhilah
RDRizki Fitria Darmayanti
Rizki Fitria Darmayanti
HSHanny Sangian
Hanny Sangian
TNTantular Nurtono
Tantular Nurtono
AWArief Widjaja
Arief Widjaja
Preventing the further degradation of monomeric or oligomeric sugar into by-product during biomass conversion is one of the challenges for fermentable sugar production. In this study, the performance of subcritical water (SCW) and enzymatic hydrolysis of coconut husk toward reducing sugar production was investigated using a severity factor (SF) approach. Furthermore, the optimal condition of SCW was optimized using response surface methodology (RSM), where the composition changes of lignocellulose and sugar yield as responses. From the results, at low SF of SCW, sugar yield escalated as increasing SF value. In the enzymatic hydrolysis process, the effect of SCW pressure is a significant factor enhancing sugar yield. A maximum total sugar yield was attained on the mild SF condition of 2.86. From this work, it was known that the SF approach is sufficient parameter to evaluate the SCW and enzymatic hydrolysis of coconut husk. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

13 September 2022 in CHEESA: Chemical Engineering Research Articles
Verified
Journal Article
Open access
PDF file
SFSiska Nuri Fadilah
Siska Nuri Fadilah
AKAchri Isnan Khamil
Achri Isnan Khamil
MMMaktum Muharja
Maktum Muharja
RDRizki Fitria Darmayanti
Rizki Fitria Darmayanti
VAViqhi Aswie
Viqhi Aswie
Previous reports showed that there has been a continuous increase in the annual production of onion in Indonesia, and it is inversely proportional to the market price. The price drop is often caused by the high water content, which makes it easy to rot. Preservation of onions through a tray dryer is a good preservation method because it is effective and does not require much energy. Therefore, this study aims to determine the effect of variations in time, material thickness, and air velocity on the drying rate of onions. The samples were sliced to a size of 2 - 5 mm, followed by drying for 60 min using a tray dryer with different air rates between 4 - 7 m/s, and the rate of the process was observed every 15 min. The results showed that the drying time reduced the humidity in the chamber. The highest rate of 0.525 g/min was obtained at the peak air rate of 7 m/s. ANOVA results revealed that variations in time, onion thickness, and flow rate have a significant effect on increasing the drying rate of onions. This indicates that the method can be an effective and efficient solution to optimize the drying of the commodity.

19 December 2022 in Bulletin of Chemical Reaction Engineering & Catalysis
Verified
Journal Article
Open access
PDF file
MMMaktum Muharja
Maktum Muharja
AWArief Widjaja
Arief Widjaja
RDRizki Fitria Darmayanti
Rizki Fitria Darmayanti
NFNur Fadhilah
Nur Fadhilah
BABramantyo Airlangga
Bramantyo Airlangga
IAI Made Arimbawa
I Made Arimbawa
The competitive reactions of lignocellulose hydrolysis and monosaccharide degradation in the subcritical water (SCW) hydrolysis of coconut husk were investigated to optimize the reducing sugar yield. Optimization analysis was performed by response surface methodology (RSM) and kinetics studies. Parameters of process optimization were varied at 130-170 °C for 15-45 min. The reducing sugars were measured using the Dinitro salicylic acid method. The sugar yield increased when the temperature increased from 130 °C to 170 °C. The highest reduction sugar yield of 4.946 g/L was obtained at 183.6 °C for 4.8 min and 23.4 liquid/solid ratio (LSR). Kinetics studies were carried out at temperature variations of 150, 170, and 190 °C and pressures of 60, 80, and 100 bar for 5 to 60 min. The yield of reducing sugar decreased with increasing temperature. The kinetic model 2B is the best method to explain the competitive reaction kinetics of coconut husk hydrolysis. This research is an innovation to increase the reducing sugar to make the process more commercially viable. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

13 April 2021 in International Journal of Technology
Verified
Journal Article
Closed access
RDRizki Fitria Darmayanti
Rizki Fitria Darmayanti
ASAri Susanti
Ari Susanti
FSFelix Arie Setiawan
Felix Arie Setiawan
MRMeta Fitri Rizkiana
Meta Fitri Rizkiana
MMMaktum Muharja
Maktum Muharja
ZYZanuba Anggie Yanti
Zanuba Anggie Yanti
Biobutanol is a renewable fuel that can be used as a gasoline substitute and a chemical feedstock. Its production using the Clostridial bacterial strain involves three steps: refreshment from a stock, a preculture for bacterial propagation, and primary fermentation for butanol production. Refreshment is an important process to activate the bacteria and multiply the stock. This process uses potato glucose media for C. saccharoperbutylacetonicum N1-4, while the use of starch from other sources has not been studied. This study aimed to understand various carbon sources’ effects on this refreshment process as part of ABE (acetone-butanol-ethanol) fermentation. Starch was substituted in refreshment media with several types of potato, rice, sweet corn, and sweet potato at 15% w/v. After 24 hours of refreshment at an ambient temperature, fermentation was run for 48 hours in TYA (tryptone-yeast-acetate) glucose media. All the starch sources could be used in the refreshment process, resulting in butanol and total solvent concentration ranging from 7.58 to 8.76 g/L and 12.5 to 14.6 g/L, respectively. Among the samples, sweet corn provided the highest fermentation performance, with butanol of 8.76 g/L, total solvents of 14.6 g/L, average butanol productivity of 0.182 g/L/h, and a butanol yield per substrate of 0.481 C-mol/C-mol. All the starchy materials used in this experiment offered potential for ABE fermentation, while sweet corn performed remarkably—producing the highest final butanol concentration, productivity, and yield.