Development of refractory metals for application as plasma-facing armour material remains among priorities of fusion research programmes in Europe, China and Japan. Improving the resistance to high temperature recrystallization, enhancing material strength to sustain thermal fatigue cracking and tolerance to neutron irradiation are the key indicators used for the down selection of materials and manufacturing processes to be applied to deliver engineering materials. In this work we investigate the effect of neutron irradiation on mechanical properties and microstructure of several tungsten grades recently developed. Neutron irradiation campaign is arranged for screening purposes and therefore is limited to the fluence relevant for the ITER plasma facing components. At the same time, the neutron exposure covers a large span of irradiation temperatures from 600 up to 1000 °C. Four different grades are included in the study, namely: fine-grain tungsten strengthened by W-carbide (W–4wt.% W2C), fine-grain tungsten strengthened by Zr carbides (W–0.5% ZrC), W alloyed with 10 at.% chromium and 0.5 at.% yttrium (W–10Cr–0.5Y) and technologically pure W plate manufactured according to the ITER specification by Plansee (Austria). The strengthening by W2C and ZrC particles leads to an enhanced strength, moreover, the W–0.5ZrC material exhibits reduced DBTT (compared to ITER specification grade) and is available in the form of thick plate (i.e. high up-scaling potential). The W–10Cr–0.5Y grade is included as the material offering the self-passivation protection against the high temperature oxidation.
1 November 2019 in Journal of the European Ceramic Society
Flow channel inserts (FCIs) are the key elements in the high-temperature dual-coolant lead-lithium blanket, since in this concept the flowing PbLi reaches temperatures near 700 °C and FCIs should provide the necessary thermal and electrical insulations to assure a safe blanket performance. In this paper, the use of a SiC-sandwich material for FCIs consisting of a porous SiC core covered by a dense chemical vapor depositionSiC layer is studied. A fabrication procedure for porous SiC is proposed and the resulting materials are characterized in terms of thermal and electrical conductivities (the latter before and after being subjected to ionizing radiation) and flexural strength. SiC materials with a wide range of porosities are produced; in addition, preliminary results using an alternative route based on the gel-casting technique are also presented, including the fabrication of hollow samples to be part of future lab-scale FCI prototypes. Finally, to study the corrosion resistance of the material in hot PbLi, corrosion tests under static PbLi at 700 °C and under flowing PbLi at ~10 cm/s and 550 °C, with and without a 1.8-2T magnetic field, were performed to materials coated with a 200-400-μm-thick dense SiC layer, obtaining promising results.