1 August 2022 in Journal of Laser Applications
The article is devoted to one of the effective technologies for processing solid transparent materials—thermoplasmonic laser-induced backside wet etching (TP LIBWE). This technology involves aqueous solutions of metal precursors as a working medium. The dependence of the efficiency of sapphire TP LIBWE micromachining on the parameters of laser action is studied with the aqueous solution of the AgNO3 precursor as a working media. The near-optimal range of laser intensities from the point of the etching speed and quality is found. Utilizing the optoacoustic methods, high-speed video, and an optical integrating sphere, the initial stage of the TP LIBWE process is studied in detail. A four-stage model of the TP LIBWE beginning process is proposed, which explains the effects from the beginning of Ag nanoparticle formation in the region of laser exposure to the transition of the TP LIBWE process to a stationary laser microstructuring mode. It is shown that effective microstructuring occurs due to the appearance on the sapphire surface of a thin modified layer in the region of laser action. This thin modified layer is an amorphous Al2O3 with numerous plasmonic Ag nanoparticles inside it and at the sapphire/liquid interface.
1 December 2024 in Russian Journal of Physical Chemistry B
The dynamics of submicron gold particle formation during laser ablation in supercritical and liquid CO2 are investigated using time-resolved Mie scattering absorption spectroscopy. It is found that a high density of CO2 of approximately 800 kg/m3, regardless of the phase state, leads to the formation of laser-induced medium fluctuations on time scales of 10 to 1000 μs, during which the defocusing of subsequent laser pulses may occur. Under conditions of the reduced fluid density in the vicinity of the Widom region (P = 8.5 МРa, T = 310 K), it is demonstrated that nanoparticles can leave the interaction zone unhindered as evidenced by the exponential increase in integral absorption. Data from the absorption spectra allow the observation of the nanoparticle formation dynamics with an average diameter of approximately 160 nm and a log-normal size distribution, the width of which is determined by the thermodynamic conditions of CO2.
1 August 2026 in Russian Journal of Physical Chemistry B
An experimental setup has been developed for the in situ optical diagnostics of the formation of submicron particles using the micronization method of rapid expansion of supercritical solutions (RESS). The particle sizes are controlled based on measurements of the Mie scattering indicatrix (in the angle range of 15°–160°) of probing laser radiation (λ = 450 nm). The paper describes a technique for modeling the scattering indicatrix of an ensemble of particles based on the solution of the Mie problem. Ibuprofen particles with sizes of 400–2000 nm were obtained and characterized at supercritical initial conditions of 130 bar and 310 K. A method is proposed to increase the efficiency of ibuprofen micronization in the RESS process based on explosive boiling of a subcritical CO2 + ibuprofen mixture at process parameters of 70 bar and 302 K. The predominance of submicron ibuprofen particles with a lognormal distribution and an average size of 540 ± 140 nm is shown.