1 January 2016 in Procedia Engineering
Shielding of different types of radiation should be studied these days when there is a great development in the field of nuclear science. Barium ions can shield different type of radiation, therefore, by incorporation of barium ions into the system of Portland clinker, a binder with shielding properties can be made. The work is focused on influence of barium ions on the formation of Portland clinker and its properties. As a source of barium, barium sulphate and barium carbonate were added to raw meal. Clinkers and cements with a different amount of barium were prepared and the effect of barium on the clinker and cement properties respectively was studied. By Rietveld analysis (using X-Ray diffraction) and microscopic point counting method, the ratio of clinker phases was studied. With increasing amount of barium, the alite : belite ratio was decreasing and the amount of free lime was increasing. Sulphate decelerates the decreasing ratio and causes grow of alite crystals to great dimensions. The presence of barium in different phases was observed by SEM with EDS. The highest amount of barium was found in belite and clinker melt. In clinker melt, conglomerations of barium were formed. Furthermore, a difference in formation temperature of clinker phases was observed and some elementary tests were done on prepared cements according to the European standards
1 January 2016 in Procedia Engineering
Properties of cement pastes with various replacement levels of natural zeolite were tested by isothermal calorimetry and rotational rheology. Zeolite from the Eastern Slovakia region was used for tests. Kinetics of exothermic reaction during early-stage of hydration were monitored by calorimetry. The role of different replacement level of zeolite on main rheological parameters is discussed in the paper. The onset point of formation of C-S-H products and the main calorimetric peak move to earlier times with increased zeolite content. Zeolite causes acceleration of hydration before the heat flow peak time and the following deceleration proportionally to its content. Zeolite in cement promotes the AFt formation, which increases the elastic response of fresh paste at the beginning of hydration. Trends of G’ and phase angle show that zeolite accelerates the hydration of C3S and early C-S-H formation
2 July 2019 in Journal of Thermal Analysis and Calorimetry
7 August 2019 in Journal of Thermal Analysis and Calorimetry
1 June 2018 in IOP Conference Series: Materials Science and Engineering
Alkali activated materials have shown potential for use in high temperature applications. This paper deals with thermal behaviour of various inorganic polymer formulations, which were prepared by mixing metakaolin, blast furnace slag, fly ash and cement kiln dust as alkaline activator. The cement kiln dust was added in the amount of 10 wt.%. The influence of thermal treatment ranging from 30 to 1000°C on the following characteristics was evaluated: compressive strength, thermal expansion, weight loss, melting point, morphology changes and dehydration. The thermal behaviour was studied by TG-DTA analysis, dilatometry and heating microscope, XRD analysis was used to examine phase changes. All measurements were conducted on samples after 28 days of curing time.
27 May 2019 in Materials Science Forum
Nowadays, in industrial production, lithium consumption is strongly increasing and it can be assumed that waste material with an increased content of this metal could also appear. One of the most important sectors where different types of waste can be utilized is the cement industry. Therefore, it is desirable to monitor the influence of lithium on formation and properties of the clinker. In the presented work, this effect was monitored in laboratory conditions up to 5 wt.% Li2O. X-ray diffraction, DTA and optical microscopy were employed as research methods. Among other things, it has been found that Li2O causes the decomposition of the alite, the major clinker phase, to a microcrystalline mixture of belite and free lime, depending on its content and clinker cooling rate.