29 July 2020 in Contributions to Geophysics and Geodesy
The hydraulic structures for the land reclamation needs and their operation are the objects of careful attention. The water-bearing earth dams of small height pose an extra danger, where the accident occurs the most often. Such facilities should be constantly monitored to prevent the dangerous incidents. The article discusses an alternative method for studying the filtration properties of earth dams by the electrical parameters – resistivity, induced polarization and self-potential. The relative polarizability was used to exclude the influence of electrical resistivity to the induced polarization data. A study of advanced technology to identify the filter zones was carried out on an earthen dam in the Almaty region, Kazakhstan. The measurement data for three profiles are presented as the sections form in the parameters of resistivity and relative polarizability. Their complex interpretation with the respect of self-potential data, is given as a diagram of probable filtration paths. This is possibly due to the local increased watering in the dam loamy body. Then, the electric and self-potential parameters were evaluated to determine the filtering zones. The study results of above parameters have identified several water-saturated zones in the dam body. This technology could be used to estimate the condition of such objects and their engineering-geological monitoring.
20 June 2025 in International Journal of Innovative Research and Scientific Studies
This study aims to improve the detection of internal seepage zones in earthen dams by integrating Electrical Resistivity Tomography (ERT), UAV-derived topographic data, and GIS technology. Monitoring the internal condition of hydraulic structures is essential to identify potential failure risks before they become critical. The methodology involved acquiring ERT profiles along multiple profiles along a dam, with electrode elevations first measured using GPS and then corrected using high-resolution digital elevation models (DEMs) generated from UAV surveys. These datasets were processed and analyzed within a GIS environment to assess the impact of elevation accuracy on subsurface modeling. The findings revealed that the inclusion of UAV-based DEMs improved the vertical resolution of geoelectrical models, reducing depth estimation errors and allowing for more precise delineation of subsurface anomalies. Four low resistance zones (<20 Ω·m) were detected at depths of 15–25 meters, spatially aligned with visible signs of seepage and erosion. The results demonstrate that combining geophysical surveys with remote sensing based on UAVs enhances the reliability of dam condition assessments. This integrated, non-invasive approach provides a cost-effective and scalable solution for routine dam safety monitoring and retrospective analysis, offering practical value for infrastructure managers, engineers, and regulatory agencies.