Metal halide perovskites have the potential to contribute to renewable energy needs as a high efficiency, low-cost alternative for photovoltaics. Initial power conversion efficiencies are superb, but improvements to the operational stability of perovskites are needed to enable extensive deployment. Mechanical stress is an important, but often misunderstood factor impacting chemical degradation and reliability during thermal cycling of perovskites. In this manuscript, we find that a commonly used equation based on the coefficient of thermal expansion (CTE) mismatch between perovskite and substrate fails to accurately predict residual stress following solution-based film formation. For example, despite similar CTEs there is a 60 MPa stress difference between narrow bandgap “SnPb perovskite” Cs0.25FA0.75Sn0.5Pb0.5I3 and “triple cation perovskite” Cs0.05MA0.16FA0.79Pb(I0.83Br0.17)3. A combination of in situ absorbance and substrate curvature measurements are used to demonstrate that partial attachment prior to the anneal can reduce residual stress and explain wide stress variations in perovskites.
Achieving reproducible perovskite solar cell fabrication is crucial for making it a scalable technology. We demonstrate an automated gas quenching system to improve perovskite solar cell reproducibility at the lab-scale. We use in situ photoluminescence to monitor the perovskite film formation as a function of the atmosphere in the glove box and find that antisolvent quenching is more sensitive to lingering precursor solvents than the gas quenching method. We observe a better reproducibility with gas quenching than with antisolvent quenching because it maintains a more consistent atmosphere in the glove box. The automated gas quenching process leads to high performing devices that are reproducible both batch to batch and researcher to researcher. The insights into gas quenching film formation as a function of solvent atmosphere and quench velocity will help inform future studies on large scale fabrication systems.