1 January 2008 in Journal of the Electrochemical Society
Niobium surfaces are commonly electropolished in an effort to obtain optimal smoothness for high-field superconducting radio-frequency cavity applications. We report the use of controlled electrochemical analysis techniques to characterize electropolishing of Nb in a sulfuric and hydrofluoric acid electrolyte. Through the use of a reference electrode, we are able to clearly distinguish the anode and cathode polarization potentials as well as the electrolyte voltage drop, which together sum to the applied power supply voltage. We then identify the temperature and HF concentration dependence of each potential. We also report the use of electrochemical impedance spectroscopy (EIS) on this system. EIS results are consistent with the compact salt film mechanism for niobium electropolishing (EP) in this electrolyte and are not consistent with either the porous salt film or the absorbate-acceptor mechanism. Microscopic understanding of the basic Nb EP mechanism is expected to provide an appropriate foundation with which to optimize the preparation of high-field niobium cavity surfaces.
23 August 2021 in Applied Physics Letters
Recently, Nb superconducting radio frequency cavities vacuum heat treated between 300 and 400 °C for a few hours have exhibited very high quality factors (∼5 × 1010 at 2.0 K). Secondary ion mass spectrometry measurements of O, N, and C show that this enhancement in RF surface conductivity is primarily associated with interstitial O alloying via dissolution and diffusion of the native oxide. We use a theory of oxide decomposition and O diffusion to quantify previously unknown parameters crucial in modeling this process. RF measurements of a vacuum heat-treated Nb superconducting radio frequency cavity confirm the minimized surface resistance (higher ) previously expected only from 800 °C diffusive alloying with N.
1 November 2006 in Applied Surface Science
15 August 2024 in Physical Review Accelerators and Beams
This review paper describes the energy-upgraded Continuous Electron Beam Accelerator Facility (CEBAF) accelerator. This superconducting linac has achieved 12 GeV beam energy by adding 11 new high-performance cryomodules containing 88 superconducting cavities that have operated cw at an average accelerating gradient of . After reviewing the attributes and performance of the previous 6 GeV CEBAF accelerator, we discuss the upgraded CEBAF accelerator system in detail with particular attention paid to the new beam acceleration systems. In addition to doubling the acceleration in each linac, the upgrade included improving the beam recirculation magnets, adding more helium cooling capacity to allow the newly installed modules to run cold, adding a new experimental hall, and improving numerous other accelerator components. We review several of the techniques deployed to operate and analyze the accelerator performance and document system operating experience and performance. In the final portion of the document, we present much of the current planning regarding projects to improve accelerator performance and enhance operating margins, and our plans for ensuring CEBAF operates reliably into the future. For the benefit of potential users of CEBAF, the performance and quality measures for the beam delivered to each of the experimental halls are summarized in the Appendix.
6 December 2011 in Physical Review Special Topics - Accelerators and Beams
Surface topography characterization is a continuing issue for the superconducting radio frequency (SRF) particle accelerator community. Efforts are under way to both improve surface topography and its characterization and analysis using various techniques. In measurement of topography, power spectral density (PSD) is a promising method to quantify typical surface parameters and develop scale-specific interpretations. PSD can also be used to indicate how the process modifies topography at different scales. However, generating an accurate and meaningful topographic PSD of an SRF surface requires careful analysis and optimization. In this report, niobium surfaces with different process histories are sampled with atomic force microscopy and stylus profilometry and analyzed to trace topography evolution at different scales. An optimized PSD analysis protocol to serve SRF needs is presented.
27 April 2012 in Physical Review Special Topics - Accelerators and Beams
Microroughness is viewed as a critical issue for attaining optimum performance of superconducting radio frequency accelerator cavities. The principal surface smoothing methods are buffered chemical polish (BCP) and electropolish (EP). The resulting topography is characterized by atomic force microscopy (AFM). The power spectral density (PSD) of AFM data provides a more thorough description of the topography than a single-value roughness measurement. In this work, one dimensional average PSD functions derived from topography of BCP and EP with different controlled starting conditions and durations have been fitted with a combination of power law, correlation, and shifted Gaussian models to extract characteristic parameters at different spatial harmonic scales. While the simplest characterizations of these data are not new, the systematic tracking of scale-specific roughness as a function of processing is new and offers feedback for tighter process prescriptions more knowledgably targeted at beneficial niobium topography for superconducting radio frequency applications.