15 July 2021 in New Journal of Chemistry
A superhydrophobic and corrosion-resistant coating with hierarchical macro/nanostructures was constructed by one-step electrodeposition of dodecyltrimethoxysilane (e-DTMS) on Mg alloy AZ31 in a relatively media. The surface morphology and chemical composition were characterized using field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS). Surface wettability was evaluated by measuring water contact angles and sliding angles of water droplets. The protective performance was measured by electrochemical and hydrogen evolution tests. The results indicated that the e-DTMS coating had excellent self-cleaning performance with a contact angle of 158° ± 2.3° and a sliding angle of 4° ± 0.5°. The superhydrophobic surface greatly reduced the contact area between the AZ31 substrate and water, and it was chemically stable in corrosive media. The corrosion current density (2.11 × 10−7 A cm−2) of the e-DTMS coating was about three hundred times less than that of the AZ31 substrate (7.34 × 10−5 A cm−2). The results demonstrated that the e-DTMS coating remarkably enhanced the anti-corrosion performance of AZ31 alloys.
13 March 2025 in Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control
Corrosion resistance remains a significant challenge for magnesium (Mg) alloys, particularly in aggressive environments. To address this issue, the application of super-hydrophobic surfaces has emerged as a promising strategy. A composite coating was developed to enhance the corrosion resistance of AZ31 magnesium alloy by sequentially applying a dodecyltrimethoxysilane (DTMS) layer, followed by a polypropylene (PP) layer. The PP layer, composed of micro-scale spherical particles, exhibited exceptional super-hydrophobicity and chemical stability. Notably, the DTMS layer significantly improved the adhesion between the PP coating and the AZ31 substrate. Scratch tests indicated a critical load of 1482 mN for the DTMS/PP composite coating. Furthermore, the corrosion current density of the composite coating decreased to as low as 1.13 × 10 −7 A·cm −2 , representing a two-order-of-magnitude reduction compared to the bare AZ31 substrate. Electrochemical impedance spectroscopy revealed a high charge transfer resistance of 5.47 × 10 5 Ω·cm² for the DTMS/PP composite coating, underscoring its superior corrosion resistance. These results highlight the effectiveness of the newly developed coating in both mitigating corrosion and enhancing the durability of AZ31 magnesium alloy in aggressive environments.