In this article, a data-driven dynamic efficiency model is developed for efficiency evaluation and comparison of ship electric powertrain with various system configurations. Based on the proposed method, the entire powertrain efficiency is assessed from the fuel consumption to the propulsion unit and the rest of the onboard load. The efficiency model is repeated for the conventional diesel electric and the hybrid power system with batteries. In the latter case, the efficiency of the battery system is also included in the model. Then, the analysis is extended for different power system architectures such as AC and DC onboard power systems. As a case study, system efficiency in a cruise ship is investigated using a real operational profile. A comprehensive analysis is performed to demonstrate the loss distribution in each subsystem of a hybrid AC and DC power system. For a fair comparison between AC and DC, the battery charge level is equalized based on fuel compensation. The case study shows that hybridizing the ship power system increases system efficiency and enhances operational flexibility for the studied use case vessel. Furthermore, the DC hybrid power system can improve the efficiency of the whole ship powertrain due to the variable-speed operation of engines.
14 September 2020 in IEEE Transactions on Transportation Electrification
The hybridization of power systems offers the low-emission and energy-efficient marine vessels. However, it increases the complexity of the power system. Design, analysis, control, and optimization of such a sophisticated system require reliable and efficient modeling tools to cover a wide range of applications. In this work, a typical DC hybrid power system model is developed using a bond graph modeling approach. Necessary component models of varying degrees of fidelity are developed and integrated to build a system model with reasonable accuracy. The developed system model, along with the rule-based energy management system, is used to simulate the entire system and to investigate the load-sharing strategies as well as the system stability in various operating scenarios. Moreover, the simulation results are validated with experimental results conducted on a full-scale laboratory setup of DC hybrid power system and with a ship load profile. The results show that the system model is capable of capturing the fundamental dynamics of the real system. The hybrid power system model is further used to analyze the bus voltage deviation from its nominal value. The computational efficiency presented by the system is fairly good as it can simulate faster than real-time. The developed system model can be used to build up a comprehensive simulation platform for different system analysis and control designs.
This paper thoroughly evaluates battery hybridization in terms of operational energy efficiency and emissions with the effect of control design, mainly load-sharing control strategies. First, a methodology is developed to estimate fuel consumption with input from load profile and control parameters. It is further used to evaluate fuel saving potential in hybrid power systems compared to conventional power systems with three different high-level hybrid control strategies (HCS). For comprehensive benchmarking, case studies are performed on four different ship types: cruise ship, RoPax ferry, bulk carrier, and container ship. The results show that fuel saving highly depends on the implemented control strategies as the first strategy saves 6.9-8.8% fuel, the second saves 3.8-8.5%, whereas the third strategy saves -0.9-1.8%; highlighting the need for proper control strategy selection. Further, based on the ship types, the cruise ship shows highest fuel saving potential through hybridization, whereas the container ship shows the least saving potential. Moreover, implementation of the proposed battery sizing in the power systems shows a potential to reduce the number of installed generator sets in all the ship types. Further, a brief techno-economic analysis of the proposed lithium-ion battery and diesel generator (DG) shows that both the weight and space required for battery system are less than the DG counterpart, making it appropriate for the new builds and the retrofits. In this case, the battery can supply nearly equal power as the generator, but only for almost an hour, yet making substantial fuel savings.
12 September 2018 in Journal of Offshore Mechanics and Arctic Engineering
Here, we present the concept of an open virtual prototyping framework (VPF) for maritime systems and operations that enables its users to develop reusable component or subsystem models, and combine them in full-system simulations for prototyping, verification, training, and performance studies. This framework consists of a set of guidelines for model coupling, high-level and low-level coupling interfaces to guarantee interoperability, a full-system simulation software, and example models and demonstrators. We discuss the requirements for such a framework, address the challenges and the possibilities in fulfilling them, and aim to give a list of best practices for modular and efficient virtual prototyping and full-system simulation. The context of our work is within maritime systems and operations, but the issues and solutions we present here are general enough to be of interest to a much broader audience, both industrial and scientific.