1 October 2020 in IEEE Communications Surveys & Tutorials
Satellite communications (SatComs) have recently entered a period of renewed interest motivated by technological advances and nurtured through private investment and ventures. The present survey aims at capturing the state of the art in SatComs, while highlighting the most promising open research topics. Firstly, the main innovation drivers are motivated, such as new constellation types, on-board processing capabilities, non-terrestrial networks and space-based data collection/processing. Secondly, the most promising applications are described i.e. 5G integration, space communications, Earth observation, aeronautical and maritime tracking and communication. Subsequently, an in-depth literature review is provided across five axes: i) system aspects, ii) air interface, iii) medium access, iv) networking, v) testbeds & prototyping. Finally, a number of future challenges and the respective open research topics are described.
25 January 2019 in IEEE Transactions on Vehicular Technology
AVAlessandro Vanelli-Coralli
Alessandro Vanelli-Coralli
+7
1 September 2021 in IEEE Internet of Things Journal
In this article, we focus on the use of low-Earth orbit (LEO) satellites providing the narrowband Internet of Things (NB-IoT) connectivity to the on-ground user equipments (UEs). Conventional resource allocation algorithms for the NB-IoT systems are particularly designed for terrestrial infrastructures, where devices are under the coverage of a specific base station (BS) and the whole system varies very slowly in time. The existing methods in the literature cannot be applied over LEO satellite-based NB-IoT systems for several reasons. First, with the movement of the LEO satellite, the corresponding channel parameters for each user will quickly change over time. Delaying the scheduling of a certain user would result in a resource allocation based on outdated parameters. Second, the differential Doppler shift, which is a typical impairment in communications over LEO, directly depends on the relative distance among users. Scheduling at the same radio frame users that overcome a certain distance would violate the differential Doppler limit supported by the NB-IoT standard. Third, the propagation delay over an LEO satellite channel is around 4–16 times higher compared to a terrestrial system, imposing the need for message exchange minimization between the users and the BS. In this work, we propose a novel uplink resource allocation strategy that jointly incorporates the new design considerations previously mentioned together with the distinct channel conditions, satellite coverage times, and data demands of various users on Earth. The novel methodology proposed in this article can act as a framework for future works in the field.
1 July 2021 in IEEE Open Journal of the Communications Society
The current broadband coverage area requisites and the expected user demand is satisfied by the state of the art satellite industry by using multiple spot beams of high throughput satellites with fixed multi-beam pattern and footprint planning. However, in recent years, new mobile broadband users with dynamic traffic demand are requesting for services in remote geographical locations such as air (aeroplanes) and water (ships). Furthermore, the expected demand varies with time and geographical location of the users. Hence, a practical approach to meet such heterogeneous demand is to plan adaptive beams to the satellites equipped with beamforming capabilities. In this paper, we study the state of the art fixed multi-beam pattern and footprint plan and show its drawbacks to support the non-uniformly distributed user terminals and varying traffic demands. To end this, we propose an adaptive multi-beam pattern and footprint plan where we design spot beams with flexible size and position based on the spatial clustering of the users in order to increase the flexibility of the high throughput satellite system. Numerical simulations demonstrate the high system performance of the proposed methodology.
30 July 2021 in IEEE Access
Non-terrestrial Networks (NTNs) have become an appealing concept over the last few years and they are foreseen as a cornerstone for the next generations of mobile communication systems. Despite opening up new market opportunities and use cases for the future, the novel impairments caused by the signal propagation over the NTN channel, compromises several procedures of the current cellular standards. One of the first and most important procedures impacted is the random access (RA) procedure, which is mainly utilized for achieving uplink synchronization among users in several standards, such as the fourth and fifth generation of mobile communication (4 & 5G) and narrowband internet of things (NB-IoT). In this work, we analyse the challenges imposed by the considerably increased delay in the communication link on the RA procedure and propose new solutions to overcome those challenges. A trade-off analysis of various solutions is provided taking into account also the already existing ones in the literature. In order to broaden the scope of applicability, we keep the analysis general targeting 4G, 5G and NB-IoT systems since the RA procedure is quasi-identical among these technologies. Last but not least, we go one step further and validate our techniques in an experimental setup, consisting of a user and a base station implemented in open air interface (OAI), and an NTN channel implemented in hardware that emulates the signal propagation delay. The laboratory test-bed built in this work, not only enables us to validate various solutions, but also plays a crucial role in identifying novel challenges not previously treated in the literature. Finally, an important key performance indicator (KPI) of the RA procedure over NTN is shown, which is the time that a single user requires to establish a connection with the base station.
29 June 2021 in IEEE Transactions on Vehicular Technology
Carrier Aggregation is one of the vital approaches to achieve several orders of magnitude increase in peak data rates. While carrier aggregation benefits have been extensively studied in cellular networks, its application to satellite systems has not been thoroughly explored yet. Carrier aggregation can offer an enhanced and more consistent quality of service for users throughout the satellite coverage via combining multiple carriers, utilizing the unused capacity at other carriers, and enabling effective interference management. Furthermore, carrier aggregation can be a prominent solution to address the issue of the spatially heterogeneous satellite traffic demand. This paper investigates introducing carrier aggregation to satellite systems from a link layer perspective. Deployment of carrier aggregation in satellite systems with the combination of multiple carriers that have different characteristics requires effective scheduling schemes for reliable communications. To this end, a novel load balancing scheduling algorithm has been proposed to distribute data packets across the aggregated carriers based on channel capacities and to utilize spectrum efficiently. Moreover, in order to ensure that the received data packets are delivered without perturbing the original transmission order, a perceptive scheduling algorithm has been developed that takes into consideration channel properties along with the instantaneous available resources at the aggregated carriers. The proposed modifications have been carefully designed to make carrier aggregation transparent above the medium access control (MAC) layer. Additionally, the complexity analysis of the proposed algorithms has been conducted in terms of the computational loads. Simulation results are provided to validate our analysis, demonstrate the design tradeoffs, and to highlight the potentials of carrier aggregation applied to satellite communication systems.