Monitoring the spatiotemporal variability of nutrient concentrations in shelf seas is important for understanding marine primary productivity and ecological problems. However, long time-series and high spatial-resolution nutrient concentration data are difficult to obtain using only on ship-based measurements. In this study, we developed a machine-learning approach to reconstruct monthly sea-surface dissolved inorganic nitrogen (DIN), dissolved inorganic phosphorus (DIP), and dissolved silicate (DSi) concentrations in the Yellow and Bohai seas from 2003–2019. A large amount of in situ measured data were first used to train the machine-learning model and derive a reliable model with input of environmental data (including sea-surface temperature, salinity, chlorophyll-a, and Kd490) and output of DIN, DIP, and DSi concentrations. Then, longitudinal (2003–2019) monthly satellite remote-sensing environmental data were input into the model to reconstruct the surface nutrient concentrations. The results showed that the nutrient concentrations in nearshore (water depth < 40 m) and offshore (water depth > 40 m) waters had opposite seasonal variabilities; the highest (lowest) in summer in nearshore (offshore) waters and the lowest (highest) in winter in nearshore (offshore) waters. However, the DIN:DIP and DIN:DSi in most regions were consistently higher in spring and summer than in autumn and winter, and generally exceeded the Redfield ratio. From 2003–2019, DIN showed an increasing trend in nearshore waters (average 0.14 μmol/L/y), while DSi showed a slight increasing trend in the Changjiang River Estuary (0.06 μmol/L/y) but a decreasing trend in the Yellow River Estuary (–0.03 μmol/L/y), and DIP exhibited no significant trend. Furthermore, surface nutrient concentrations were sensitive to changes in sea-surface temperature and salinity, with distinct responses between nearshore and offshore waters. We believe that our novel machine learning method can be applied to other shelf seas based on sufficient observational data to reconstruct a long time-series and high spatial resolution sea-surface nutrient concentrations.
Turbidity is an important parameter in monitoring water quality, and thus attracts significant attention. Changes in the various components and constituent elements of water directly affect turbidity measurements. The turbidity of water is generally quantified by measuring the absorbance or scattering characteristics of substances suspended in it. The complex composition of environmental water bodies complicates the determination of factors influencing their turbidity. Controlled experiments that quantitatively analyze the effect of a single factor on the measurement of turbidity in the laboratory are an important means to improve the accuracy of turbidity assessment. Properties of suspended materials in a water column that may affect its measured turbidity include the concentration of algae, particle size, and the color of soluble substances, etc. The laboratory experiments reported here used Chlorella as an example to investigate the effect of algal concentration on turbidity measurement. The results are as follows. When the turbidity is low (100 NTU), the average relative error between the theoretical and practical absorbance is about 37.52%, which decreases to 19.20% at 100–200 NTU and 5.16% at 200–400 NTU. The characteristic spectral bands sensitive to turbidity (680 nm) and Chlorella (240 nm) were selected, and the theoretical and practical turbidity results were analyzed. The average relative errors of mixed liquids of less than 100, 100–200, and 200–400 NTU are 65.07%, 34.18%, and 3.95%, respectively. Therefore, the concentration of Chlorella significantly affects the measured turbidity, and results in a more complex effect at low turbidity (<100 NTU). Combining the analysis of absorbance peak values and characteristic spectral bands, we can assess the turbidity changes in different components, and through calibration, information regarding the concentration and variation of different components in water bodies can be obtained. The results of this research could improve the accuracy of on-site measurement of the concentrations of different components suspended in water, and also facilitate the development of new turbidity sensors.
6 March 2025 in Journal of Oceanology and Limnology