15 January 2014 in Journal of Materials Chemistry A
A novel composite material GrO@MIL-101 was synthesized using a solvothermal synthesis method. Then the parent materials (MIL-101 and graphene oxide) and the GrO@MIL-101 were characterized using SEM, TEM, XRD, nitrogen sorption, and Raman. The acetone isotherms on the GrO@MIL-101 and MIL-101 were measured separately. The isosteric heat of adsorption and the desorption activation energies of acetone on the two samples were estimated. The results of characterization confirmed the formation of well-defined GrO@MIL-101 with higher surface area and pore volume compared to the MIL-101, and the crystal size of the MIL-101 in the composite was smaller than that of the parent MIL-101. The acetone isotherms on the GrO@MIL-101 were much higher than those on the MIL-101. The acetone adsorption capacity of the GrO@MIL-101 was up to 20.10 mmol g−1 at 288 K and 161.8 mbar, having an increase of 44.4% in comparison with the MIL-101. The desorption activation energy of acetone on the GrO@MIL-101 was higher than that on the MIL-101, indicating the stronger interaction between acetone molecules and the GrO@MIL-101. Consecutive cycles of acetone adsorption–desorption showed that the desorption efficiency of acetone on the GrO@MIL-101 can reach 91.3%. Acetone adsorption on this composite material was highly reversible.
1 August 2016 in Chemical Engineering Journal
15 November 2012 in AIChE Journal
22 October 2013 in Green Chemistry
We firstly propose the application of CNTs as novel catalysts and molecular oxygen as the oxidant for the oxidative desulfurization (ODS) of a model fuel containing benzothiophene (BT), dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT) at atmospheric pressure and low temperature. Results showed that when three CNTs including CNT-SZ, CNT-TS, and CNT-CD were separately used as catalysts with molecular oxygen as the oxidant, the conversion of DBT to its corresponding sulfone reached 100% at 150 °C separately within 40, 120 and 180 min. The CNT-SZ exhibited a superior catalytic activity even at a high fuel-to-catalyst ratio of 7.5 kg fuel per g catalyst. The oxidation reactivity of these benzothiophenic compounds followed the order: 4,6-DMDBT > DBT > BT. The deactivated CNT can be effectively regenerated by heat treatment under an argon atmosphere at 900 °C. Raman spectroscopy analysis revealed that the graphitization degree of the CNT played a decisive role in its catalytic activity for DBT oxidation. The CNT with the higher degree of graphitization had higher catalytic activity for DBT oxidation since its higher electric conductivity benefited the transfer of electrons involved in the oxidation–reduction reaction.
1 May 2014 in Journal of Materials Chemistry A
A graphene/chromium-MOF(MIL-101) composite is proposed to serve as a sulfur host for stabilized Li–S batteries.
1 June 2015 in Applied Thermal Engineering