6 August 2021 in Materials and Manufacturing Processes
The enhancement of surface roughness of a textile-like porous medium fabricated by 3D printing techniques is crucial for the repeatability of permeability experiments from test to test. This paper aims at comparison of the surface quality of textile-like porous media fabricated by Stereolithography (SLA), Fused Deposition Modeling (FDM), and Multi Jet Fusion (MJF) 3D printing techniques. Hence, a 3D optical profilometer was used to evaluate the 3D areal surface texture parameters of samples according to ISO 25178. The results revealed that SLA technique produces the smoothest surface with the lowest deviation in the measured values of the surface characteristics. Also, the surface parameters such as the average roughness (Sa) and root mean square (RSM) roughness (Sq) of the top surface of MJF samples are lower than those measured for FDM sample. Furthermore, filling pattern of the FDM technique as a trajectory filament-based AM process results in rougher horizontal surfaces compared to those produced by a non-trajectory powder-based process such as MJF.
18 December 2019 in Polymer Composites
1 December 2020 in Composites Part A: Applied Science and Manufacturing
29 October 2020 in Advanced Composite Materials
The presence of the tufts has direct influence on the permeability of textile preforms. In this paper, new insights are presented into the mechanisms responsible for changes to the in-plane permeability of tufted preforms according to three different tufting patterns relative to flow direction with a constant tufting distance. The saturated permeabilities are measured based on the rectilinear flow in a tool constituted by a steel base, a transparent PMMA top, and steel supports. Beforehand, the permeability measurements of textile preform composed of eight layers of plain weave glass fabric without tufting are conducted at three different cavity heights. The results show that the in-plane permeability values for the tufted preforms are lower than the permeability values of the preform without tufting. The paper reveals the significant influence of the tufting patterns on the permeability values for three different fibre volume fractions.
26 February 2026 in Polymer Composites