1 February 2024 in Physics of Fluids
The deformation process of compound droplets moving in air flow was studied by using volume of fluid model. In this paper, the kinetic process of air-in-liquid CeO2 compound droplets in air flow is reported by numerical simulation. First, the effects of initial velocity, initial diameter, and internal and external pressure difference on droplet behavior were studied when the compound droplets finally reached the morpho-steady state. The self-compiled program is used to process and analyze the digital image of the simulated broken image. The results show that, under the action of four main forces, namely, external aerodynamic force, internal pressure, viscous force, and surface tension, the inner surface of the hollow droplets gradually begins to break and continues to expand to the outer surface to break. With the increase in the pressure difference between inside and outside of the hollow drops, the pores are severely deformed and cracked. The increase in velocity leads to the imbalance of internal and external surface forces caused by the increase in aerodynamic fluctuation on the outer surface of hollow droplets. With the decrease in the diameter of the hollow droplet, the pressure threshold of the droplet breaking decreases and it is easier to break.
1 April 2024 in Physics of Fluids
In this study, a three-dimensional compound droplet collision numerical model is established by using volume of fluid. The morphological evolution of compound hollow droplets affected by high-speed solid droplet was studied in detail. Parameterized analysis is conducted on the velocity VS, center distance ϕ, and diameter ζ of high-speed small droplets. Through the analysis of the compound droplets flow field, it is found that the broken mode of compound droplets is caused by the increase in Pn (dimensionless pressure) and θ (velocity angle). The results show that the surface Pn of compound droplets is positively correlated with the velocity VS of high-speed small droplets, while there is a more complex relationship with the dimensionless center distance ϕ and dimensionless diameter ζ. When the values of ϕ and ζ are appropriate, Pn can reach its maximum value. The broken mode of compound droplets can be divided into three categories: shear deformation, shear crushing, and violent crushing.
1 July 2024 in Physics of Fluids
The volume of fluid-continuum surface force model is used to systematically study the influence of characteristic parameters, internal pressure on the dynamic characteristics, finite deformation mode, and fracture mode of compound droplets in air. The simulation results indicate that the morphology evolution of compound droplets can be divided into two stages: expansion deformation stage and irregular deformation stage. And for the first time, it is proposed that the crushing methods of compound droplets can be divided into two types: overall oscillation and local oscillation. Increasing the internal pressure of the compound droplet will cause severe deformation of the compound droplet, and the time required for the expansion and deformation stage will be reduced. However, the influence of fluid interfacial tension and viscosity on the bottom dynamics of compound droplets is often complex, leading to significant changes in the deformation mode of compound droplets. In addition, the influence of feature parameters We and Ca is further discussed. The research results can provide theoretical guidance for precise control of their arrangement in core–shell driven microfluidic technology.
1 April 2026 in Physics of Fluids
With the increasingly stringent requirements for steel properties in high-end manufacturing, insufficient hot metal desulfurization efficiency has emerged as a key bottleneck, making this process a research hotspot. To establish an effective correlation between the macroscopic flow field and microscopic bubble behavior for improved desulfurization, this study combined water modeling with numerical simulation. We systematically investigated the fluid flow characteristics associated with bubble refinement and the stirred flow field. The effects of three key process parameters—stirring speed, eccentricity, and injection flow rate—on mixing efficiency were analyzed, and the interaction mechanisms among turbulent kinetic energy, flow distribution, and bubble refinement were explored. Results indicate that increasing the stirring speed from 60 to 180 r/min reduced the Sauter mean diameter of bubbles from 5 ± 1 to 3 ± 1 mm, although higher speeds promoted vortex formation and surface vortexing. Increasing the eccentricity suppressed vortices, with the most uniform bubble size distribution achieved at 80 mm, albeit with asymmetric gas distribution in the flow field. Both excessively high and low injection flow rates degraded desulfurization performance. A comprehensive evaluation of the three parameters suggests that optimal stirring–injection performance is achieved at a stirring speed of 120 r/min, an eccentricity of 60 mm, and an injection flow rate of 1.5 m3/h. This study elucidates the influence of key parameters on bubble refinement and fluid flow, providing a theoretical basis for optimizing the stirring–injection desulfurization process.