21 March 2017 in Journal of Engineering for Gas Turbines and Power
Diluting spark-ignited (SI) stoichiometric combustion engines with excess residual gas improves thermal efficiency and allows the spark to be advanced toward maximum brake torque (MBT) timing. However, flame propagation rates decrease and misfires can occur at high exhaust gas recirculation (EGR) conditions and advanced spark, limiting the maximum level of charge dilution and its benefits. The misfire limits are often determined for a specific engine from extensive experiments covering a large range of speed, torque, and actuator settings. To extend the benefits of dilute combustion while at the misfire limit, it is essential to define a parameterizable, physics-based model capable of predicting the misfire limits, with cycle to cycle varied flame burning velocity as operating conditions change based on the driver demand. A cycle-averaged model is the first step in this process. The current work describes a model of cycle-averaged laminar flame burning velocity within the early flame development period of 0–3% mass fraction burned. A flame curvature correction method is used to account for both the effect of flame stretch and ignition characteristics, in a variable volume engine system. Comparison of the predicted and the measured flame velocity was performed using a spark plug with fiber optical access. The comparison at a small set of spark and EGR settings at fixed load and speed, shows an agreement within 30% of uncertainty, while 20% uncertainty equals ± one standard deviation over 2000 cycles.
1 June 2022 in Physics of Fluids
Thrust abruption due to mode transition could be catastrophic for hypersonic vehicles. To understand the underlying physics, a direct-connected transient Flight Trajectory Simulator 1 (FTS-1) has been developed at the Institute of Mechanics, Chinese Academy of Sciences. This facility uses advanced high-speed measuring techniques, including thrust and static wall pressure measurement, and Schlieren and hydrocarbon radical chemiluminescence (CH* chemiluminescence) imaging. Kerosene-fueled dual-mode combustor experiments are designed in an acceleration trajectory. The basic operation parameters and the flame and flow dynamics of the acceleration induced mode transition are evaluated. Discussions are given on the triggering mechanisms responsible for the ram to scram mode transition in a simulated flight acceleration.
1 August 2022 in Physics of Fluids
We investigate the motions of polydisperse droplets in homogeneous and isotropic turbulence at Reynolds numbers –300. The emphasize is put on the parameter dependences of spatial velocity correlations (SVCs) and relative velocities (RVs) of droplets, which are relevant to particle transport and dispersion in turbulence and have been less studied in experiments. The Kolmogorov-scale Stokes number is – , and the settling parameter, i.e., the ratio of particle settling velocity to fluid velocity fluctuations, is –2.0. Using high-resolution measurements, we can resolve the motions of turbulence and droplet over a wide range of scales ( to , η is Kolmogorov length). The parabolic behavior in droplet SVCs near the origin is observed, similar to turbulence. The droplet SVCs are smaller than turbulence for all scales and decrease with both and . At large scales, the droplet RVs, smaller than those of turbulence due to the inertial filtering effect, also decrease with and . At small scales, the path-history effect leads to larger droplet RVs than fluid RVs. Interestingly, we find RVs present a non-monotonic trend with and reach a valley at . It may originate from particle clustering and preferential sweeping effects, which both prevail at . It is also found that droplet motions are less intermittent than turbulence. This is in contrast to the previous observations by simulations with the gravity effect being ignored. The intermittency of droplet RVs decreases with due to the diminished droplet–turbulence interactions, and it presents opposite trends with for small and large scales. Finally, the balance between the effects of path histories and turbulent structures makes the velocity statistics of droplets quasi-independent from the scale in the range of the dissipative scale ( ).
17 May 2016 in Journal of Engineering for Gas Turbines and Power
The classification between a sequence of highly variable combustion events that have an underlying deterministic pattern and a sequence of combustion events with similar level of variability but random characteristics is important for control of combustion phasing. In the case of high cyclic variation (CV) with underlying deterministic patterns, it is possible to apply closed-loop combustion control on a cyclic-basis with a fixed mean value, such as injection timing in homogeneous charge compression ignition (HCCI) or spark timing in spark ignition (SI) applications, to contract the CV. In the case of a random distribution, the high CV can be avoided by shifting operating conditions away from the unstable region via advancing or retarding the injection timing or the spark timing in the mean-sense. Therefore, the focus of this paper is on the various methods of computing CA50 for analyzing and classifying cycle-to-cycle variability. The assumptions made to establish fast and possibly online methods can alter the distribution of the calculated parameters from cycle-to-cycle, possibly leading to incorrect pattern interpretation and improper control action. Finally, we apply a statistical technique named “permutation entropy” for the first time on classifying combustion patterns in HCCI and SI engine for varying operating conditions. Then, the various fast methods for computing CA50 feed the two statistical methods, permutation and the Shannon entropy, and their differences and similarities are highlighted.
1 February 2023 in Physics of Fluids
Linear and nonlinear characteristics of a dual-mode scramjet combustor are investigated in ground-simulated acceleration and deceleration trajectory experiments. The experiments were conducted in the direct-connected transient flight trajectory simulator 1 at the Institute of Mechanics, Chinese Academy of Sciences. High-frequency pressure measurements, the schlieren, and CH* chemiluminescence high-speed imaging were applied for the diagnostics. Based on the quantitative analysis, the physical processes of acceleration and deceleration in general represent similar nonlinear characteristics. The linear characteristics are limited to the low-frequency oscillation period in the presence of physical governing mechanisms. A nonlinear predictive model of the dual-mode scramjet combustor based on historical measurements is proposed due to its generality for the acceleration and deceleration trajectory.
1 August 2023 in Physics of Fluids
Particle collisions are mainly governed by the preferential concentration of inertia particles and the formation of fold caustics. By fold caustics, we mean that relative velocity does not go smoothly to zero when the particle separations decrease due to inertia. Despite the importance of the second-order relative velocity structure function, there has been relatively little experimental research on the formation of caustics due to the high accuracy requirements for the particle relative velocity measurements. In the dissipation range, an obvious departure between the second-order structure function of particles normalized by the square of the Kolmogorov velocity and the Kolmogorov turbulent scaling of r2 was observed for all four experimental conditions. In the inertial range, the second-order structure function normalized by the square of the Kolmogorov velocity was consistent with the scale form of r2/3 in all cases. The conditional second-order relative velocity structure function of particles in clusters differs from that of the arithmetically averaged particle statistics in both the dissipation range and the inertial subrange. In the dissipation range, caustics are present for all categories of particles. In the inertial range, the scaling of the second-order velocity structure function is almost identical for all categorized particle types.