27 March 2026 in Russian Journal of Occupational Health and Industrial Ecology
Due to the emergence and development of fire safety systems based on a hypoxic environment, it is becoming relevant to assess the mental performance of specialists in conditions of oxygen deficiency.The study aims to assess the state of the volunteers cognitive functions during the operation of fire protection facilities based on a normobaric nitrogen hypoxic environment.The authors have assessed the state of the functional state of the body on a laboratory model of mental labor activity using biomedical methods: registration of heart rate, blood pressure and saturation. To assess the dynamics of cognitive activity indicators, they used the Stroop test and visual-motor tests. For a subjective assessment of the condition, the specialists conducted a survey.The researchers noted a decrease in blood oxygen saturation and an increase in heart rate when in a hypoxic environment. Changes in cognitive function indicators were not associated with the effects of hypoxia, however, scientists noted a minor change in well-being both in the experimental group (increased headache) and in the entire sample (headache, sleepiness, rapid heartbeat).The results of the study show that when simulating mental activity in a hypoxic environment for 30 minutes, the cognitive functions and well-being of employees do not deteriorate.Limitations. Limitations are associated with the sample size, but the results obtained from individual volunteers did not contradict each other. The experts conducted a safety study of the fire protection system in artificially created conditions that did not fully correspond to the actual working conditions, but the characteristics of the hypoxic environment were reproduced. The studies were conducted only with an average oxygen content of 14% in the air, since it was assumed that this level was the minimum when using this fire extinguishing system.Ethics. The study was approved by the Local Ethics Committee of the Izmerov Research Institute of Occupational Health (Minutes No. 2 of the meeting of the Local Ethics Committee dated 02/19/2025).Contributions:Shuporin E.S. — research concept and design, text writing, editing;Chudova E.S. — research concept and design, text writing, editing;Ilyenko O.V. — writing the text;Glukhov D.V. — writing the text;Eremeeva A.G. — data collection and processing;Kalinina S.A. — data collection and processing;Vaga I.N. — data collection and processing, editing.Funding. The study had no funding.Conflict of interests. The authors declare no conflict of interest.Received: 15.12.2025 / Accepted: 21.01.2026 / Published: 27.03.2026
7 February 2025 in Russian Journal of Occupational Health and Industrial Ecology
Introduction. The object of the study was the dynamics of the functional state of the human body when performing physical work using an industrial exoskeleton designed to unload the muscles of the back and arms when lifting, lowering, carrying and holding loads weighing up to 50 kg. The study aims to assess the safety of using an industrial exoskeleton in labor modeling. Materials and methods. The authors assessed the functional state of a person within the framework of the developed laboratory model of the labor activity of a potential consumer of an industrial exoskeleton using biomedical methods: medical examination, registration of biomechanics of movements and a questionnaire. The data obtained was subjected to statistical analysis. Results. The use of an industrial exoskeleton does not affect the overall functional condition of the volunteer and does not restrict movement in the lower extremities, but it may partially restrict movement in the shoulder joints and make it difficult to perform movements in the thoracolumbar spine. The volunteer may experience local discomfort in the places where the exoskeleton parts come into contact with the skin: in the anterior surface of the wrist joint, the palmar surfaces of the hand, the anterior surface of the thigh, and the lumbar spine. Limitations. Only 12 respondents participated in the study, which may limit the possibility of data dissemination among the general population, but statistical processing did not reveal conflicting values between the results of different participants. The authors conducted a safety study on the use of an industrial prov exoskeleton in laboratory conditions that did not fully reproduce real ones and overlooked some factors affecting an employee in production. But the conditions directly related to the use of an industrial exoskeleton were reproduced by the authors. Conclusion. The study allows us to conclude that the use of an industrial exoskeleton is safe if the production operations performed in it are similar to the developed laboratory model. There was no negative effect on the general condition of the volunteers and the range of movements of the lower extremities. Limitations of the movements of the upper extremities and in the thoracolumbar spine were noted, related to the design characteristics of an industrial exoskeleton. It is necessary to change the features of an industrial exoskeleton, which can lead to the formation of microtrauma. Ethics. The study was conducted in compliance with the protocol "Safety and Effectiveness study of industrial exoskeletons", approved by the Local Ethics Committee of Izmerov Research Institute of Occupational Health (Minutes No. 1 of the meeting of the Local Ethics Committee dated 01/25/2023).
1 June 2025 in ЗДОРОВЬЕ НАСЕЛЕНИЯ И СРЕДА ОБИТАНИЯ - ЗНиСО / PUBLIC HEALTH AND LIFE ENVIRONMENT
Introduction: To assess the efficiency of applying an industrial exoskeleton, it is necessary to study changes in the functional state of the human body when performing physical work using the device and, namely, the dynamics of energy expenditures. Objective: To evaluate energy expenditures when using an industrial exoskeleton in a work simulation. Materials and methods: We tested the efficiency of applying an industrial exoskeleton in work activities, including lifting, moving and holding loads, by modeling them in laboratory conditions. In doing so, 12 volunteers were divided into two groups, which alternately performed production operations with and without the exoskeleton. Their condition was assessed by means of a medical examination and ergospirometry. The data obtained were analyzed using Statistica 10.0 and MS Office Excel 2019. Results: The parameters of the cardiovascular system of the volunteers throughout the study were within the reference values and compliant with intensity of the physical activity. In the exoskeleton group, compared with the controls, we observed a statistical increase in the respiratory rate by 8 % after the first 30 minutes, by 17 % after 60 minutes, by 21 % after 90 minutes, by 12 % after 120 minutes, by 7 % after 150 minutes, and by 8 % after 180 minutes, as well as a decrease in values of the metabolic equivalent by 4 % after 60 minutes and by 6 % after 90 minutes, in the volume of inhaled oxygen by 6 % after 60 minutes and by 3 % after 90 minutes, and in the volume of exhaled carbon dioxide by 6 % after 150 minutes. Conclusions: Our findings demonstrate the efficiency of applying the industrial exoskeleton to reduce workers’ energy expenditures when performing production operations similar to the work activities modeled.
31 July 2025 in Hygiene and sanitation
Introduction. The object of the study was the trend in the functional state in the human body when performing physical work using an industrial exoskeleton designed to unload the muscles of the back and arms when lifting, lowering, carrying, and holding loads weighing up to 50 kg. The study was conducted to evaluate the efficiency of applying an industrial exoskeleton to reduce fatigue in a work simulation environment. Materials and methods. In the laboratory, a model of an employee’s work related to lifting, moving, and holding cargo was developed. To assess the efficiency of the application of an industrial exoskeleton, a comparison was made of the degrees of fatigue in terms of the functional state of skeletal muscles when performing laboratory model of labor activity with and without an industrial exoskeleton. The following biomedical methods were used: electromyography, myotonometry, and questionnaires. The data obtained was subjected to statistical analysis. Results. When working with an exoskeleton, some muscles were in a state of less tension than when working without it. The results of the analysis of the subjective assessment of local stress showed the physical stress in the volunteers to be lower when working in an exoskeleton compared to working without it. Limitations. A small sample size and modeling in labour activity in the laboratory does not allow taking into account all the factors that affect an employee using an exoskeleton in production. For a more complete evaluation of the efficiency of an industrial exoskeleton, it is necessary to take into account the dynamics of indicators of the cardiovascular, respiratory and other body systems. Conclusions. From the point of view of the influence of the application of an industrial exoskeleton on the fatigue during production operations similar to the laboratory model of labor activity, it is possible to conclude about the efficiency of the application of an industrial exoskeleton.