Limited by large transmission loss, the development of transverse electric (TE) mode silicon-on-insulator (SOI) based on-chip long length chirped grating waveguide faces many difficulties now. To overcome this problem, multi-mode waveguide with a measured transmission loss of 0.7 dB/cm is applied in this paper, and a chirped spiral Bragg grating waveguide (SBGW) is proposed and experimentally demonstrated. The length of the chirped SBGW reaches 2.7 cm, which is the longest SOI based grating reported so far. The total group delay is measured to be 628 ps, with a structure size of only 0.3 mm2 due to the application of spiral configuration. The slope of the linear dispersion is -27.7 ps/nm. This integrated chirped SBGW shows great compatibility with frequently used TE mode SOI devices and has great potential for applications in microwave photonics requiring dispersion control.
11 September 2023 in Journal of Lightwave Technology
A method to achieve Fano resonance and Lorentz resonance is theoretically proposed in this paper, which is realized by changing the phase difference between the two input lights in the dual-injection structure. The method is analyzed by coupled-mode theory and exemplified by considering a dual-injection micro-disk resonator. Depending on the phase relationship between the two input lights in a dual-injection micro-disk resonator, two different resonances can be created. When the two input lights are out of phase by π/2, each whispering gallery mode (WGM) in the micro-disk resonator will generate Fano resonance. When the phase difference between the two input lights is zero, Lorentz resonances are observed, and some resonant modes disappear in the spectrum, which results in the free spectral range (FSR)of each mode being doubled
A TM-mode-pass polarization rotator and power divider with an arbitrary beam-splitting ratio constructed by an adiabatic taper, a spatial mode order convertor and a multi-mode interferometer (MMI) is proposed on the silicon-on insulator (SOI) platform. Both arbitrary power splitting and polarization selection-rotation can be realized in this single device. The measurements show that a continuously adjustable beam-splitting ratio from 1:99 to 99:1 within a 33.2 mW power consumption from 1520-1580 nm has been realized for the proposed device.
Conventional all-optical modulators based on surface plasmon polaritons (SPPs) primarily utilize the nonlinear effect of a given material for modulation. Their performance is heavily dependent on the optical properties of the dielectric materials used and requires high pumping power. However, manipulating SPPs by controlling electron concentrations offers a material-independent approach suitable for all-optical modulators. In this paper, we propose a hybrid gold–ITO–silver block structure integrated within a Mach–Zehnder interferometer configuration to address this problem. The gold–ITO interface effectively localizes propagating SPPs. The pump light excites localized surface plasmons (LSPs) in the silver block, generating surface electric fields that modulate the electron concentration in the adjacent ITO layer. The extinction ratio is 50.8 dB when the electron concentration changes by 3.3 × 1020 cm−3, indicating that this structure is an all-optical modulator with a high extinction ratio. This approach shows significant promise for reducing pump power and enhancing the performance of all-optical modulators.
The manipulation of surface plasmon polaritons (SPPs) plays an essential role in plasmonic science and technology. However, the modulation efficiency and size of the device in the traditional method suffer from weak light–matter interaction. Herein, we propose a new method to enhance the light–matter interaction by controlling the resonance of electrons in a sandwich structure which is composed of an interdigital electrode, dielectric, and doped semiconductor. The numerical results show that the resonance of electrons occurs when their vibrational frequency under electrostatic field matches well with the oscillation frequency of the propagating SPPs. The intensity of the electric field is enhanced about 8%, which can be utilized to improve the modulation efficiency and minimize the footprint of device to a great extent. These findings pave a new way towards higher precision sensor and more compact modulator.
To keep pace with the demands of modern photonic integration technology, the electro-optic modulator should feature multi-parameter tunable components and a compact size. Here, we propose a hybrid structure that can modulate the multi-parameters of surface plasmon polaritons (SPPs) simultaneously with a compact size by controlling the electron concentration of indium tin oxide (ITO) in the near-infrared spectrum. The length, width and height of the device are only 15 μm, 5 μm and 9 μm, respectively. The numerical results show that when the electron concentration in ITO changes from 7.5 × 1026 m−3 to 9.5 × 1026 m−3, the variation in amplitude, wavelength and phase are 49%, 300 nm and 347°, respectively. The demonstrated structure paves a new way for multi-parameter modulation and the realization of ultracompact modulators.