Pedro J. Gil Vicente

Pedro J. Gil Vicente

Auto-generated profile, based on publicly available information

Pedro J. Gil Vicente

Instituto ITACA, Universitat Politècnica de València

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 October 2019 in IEEE Access
Verified
Journal Article
Open access
Luis-J. Saiz-AdalidLuis-J. Saiz-Adalid
Luis-J. Saiz-Adalid
JGJoaquín Gracia-Morán
Joaquín Gracia-Morán
DGDaniel Gil-Tomas
Daniel Gil-Tomas
JBJuan-Carlos Baraza-Calvo
Juan-Carlos Baraza-Calvo
PGPedro-J. Gil-Vicente
Pedro-J. Gil-Vicente

11 November 2020 in Electronics
Verified
Journal Article
Open access
PDF file
Luis-J. Saiz-AdalidLuis-J. Saiz-Adalid
Luis-J. Saiz-Adalid
JGJoaquín Gracia-Morán
Joaquín Gracia-Morán
DGDaniel Gil-Tomás
Daniel Gil-Tomás
JBJuan-Carlos Baraza-Calvo
Juan-Carlos Baraza-Calvo
PGPedro-J. Gil-Vicente
Pedro-J. Gil-Vicente
The Bose-Chaudhuri-Hocquenghem (BCH) codes are a well-known class of powerful error correction cyclic codes. BCH codes can correct multiple errors with minimal redundancy. Primitive BCH codes only exist for some word lengths, which do not frequently match those employed in digital systems. This paper focuses on double error correction (DEC) codes for word lengths that are in powers of two (8, 16, 32, and 64), which are commonly used in memories. We also focus on hardware implementations of the encoder and decoder circuits for very fast operations. This work proposes new low redundancy and reduced overhead (LRRO) DEC codes, with the same redundancy as the equivalent BCH DEC codes, but whose encoder, and decoder circuits present a lower overhead (in terms of propagation delay, silicon area usage and power consumption). We used a methodology to search parity check matrices, based on error patterns, in order to design the new codes. We implemented and synthesized them, and compared their results with those obtained for the BCH codes. Our implementation of the decoder circuits achieved reductions between 2.8% and 8.7% in the propagation delay, between 1.3% and 3.0% in the silicon area, and between 15.7% and 26.9% in the power consumption. Therefore, we propose LRRO codes as an alternative for protecting information against multiple errors.

17 May 2024 in IEEE Access
Verified
Journal Article
Open access
DGDaniel Gil-Tomás
Daniel Gil-Tomás
Luis-J. Saiz-AdalidLuis-J. Saiz-Adalid
Luis-J. Saiz-Adalid
JGJoaquín Gracia-Morán
Joaquín Gracia-Morán
JBJuan-Carlos Baraza-Calvo
Juan-Carlos Baraza-Calvo
PGPedro J. Gil-Vicente
Pedro J. Gil-Vicente
MBU is an increasing challenge in SRAM memory, due to the chip’s large area of SRAM, and supply power scaling applied to reduce static consumption. Powerful ECCs can cope with random MBUs, but at the expense of complex encoding/decoding circuits, and high memory redundancy. Alternatively, radiation-hardened cell is an alternative technique that can mask single or even double node upsets in the same cell, but at the cost of increasing the overhead of the memory array. The idea of this work is to combine both techniques to take advantage of their respective strengths. To reduce redundancy and encoder/decoder overheads, SEC Hamming ECC has been chosen. About hardened cells, well-known and robust DICE cells, able to tolerate one node upset, have been used. To assess the proposed technique, we have measured the correction capability after a fault injection campaign, as well as the overhead (redundancy, area, power, and delay) of memory and encoding/decoding circuits. Results show high MBU correction coverages with an affordable overhead. For instance, for very harmful 8-bit random MBUs injected in the same memory word, more than 80% of the cases are corrected. Area overhead values of our proposal, measured with respect to double and triple error correction codes, are less than x1.45. To achieve the same correction coverage only with ECCs, redundancy, and overhead would be much higher.

5 December 2020 in Electronics
Verified
Journal Article
Open access
PDF file
JBJuan-Carlos Baraza-Calvo
Juan-Carlos Baraza-Calvo
JGJoaquín Gracia-Morán
Joaquín Gracia-Morán
Luis-J. Saiz-AdalidLuis-J. Saiz-Adalid
Luis-J. Saiz-Adalid
DGDaniel Gil-Tomás
Daniel Gil-Tomás
PGPedro-J. Gil-Vicente
Pedro-J. Gil-Vicente
Due to transistor shrinking, intermittent faults are a major concern in current digital systems. This work presents an adaptive fault tolerance mechanism based on error correction codes (ECC), able to modify its behavior when the error conditions change without increasing the redundancy. As a case example, we have designed a mechanism that can detect intermittent faults and swap from an initial generic ECC to a specific ECC capable of tolerating one intermittent fault. We have inserted the mechanism in the memory system of a 32-bit RISC processor and validated it by using VHDL simulation-based fault injection. We have used two (39, 32) codes: a single error correction–double error detection (SEC–DED) and a code developed by our research group, called EPB3932, capable of correcting single errors and double and triple adjacent errors that include a bit previously tagged as error-prone. The results of injecting transient, intermittent, and combinations of intermittent and transient faults show that the proposed mechanism works properly. As an example, the percentage of failures and latent errors is 0% when injecting a triple adjacent fault after an intermittent stuck-at fault. We have synthesized the adaptive fault tolerance mechanism proposed in two types of FPGAs: non-reconfigurable and partially reconfigurable. In both cases, the overhead introduced is affordable in terms of hardware, time and power consumption.

7 July 2021 in IEEE Latin America Transactions
Verified
Journal Article
Closed access
JGJoaquín Gracia-Morán
Joaquín Gracia-Morán
Luis-J. Saiz-AdalidLuis-J. Saiz-Adalid
Luis-J. Saiz-Adalid
JBJuan-Carlos Baraza-Calvo
Juan-Carlos Baraza-Calvo
DTDaniel Gil Tomás
Daniel Gil Tomás
PVPedro J. Gil Vicente
Pedro J. Gil Vicente
The continuous raise in the integration scale of CMOS technology has provoked an augment in the fault rate. Particularly, computer memory is affected by Single Cell Upsets (SCU) and Multiple Cell Upsets (MCU). A common method to tolerate errors in this element is the use of Error Correction Codes (ECC). The addition of an ECC introduces a series of overheads: silicon area, power consumption and delay overheads of encoding and decoding circuits, as well as several extra bits added to allow detecting and/or correcting errors. ECC can be designed with different parameters in mind: low redundancy, low delay, error coverage, etc. The idea of this paper is to study the effects produced when adding an ECC to a microprocessor with respect to overheads. Usually, ECC with different characteristics are continuously proposed. However, a great quantity of these proposals only present the ECC, not showing its behavior when using them in a microprocessor. In this work, we present the design of an ECC whose main characteristic is a low number of code bits (low redundancy). Then, we study the overhead this ECC introduces. Firstly, we show a study of silicon area, delay and power consumption of encoder and decoder circuits, and secondly, how the addition of this ECC affects to a RISC microprocessor.

15 April 2024 in IEEE Latin America Transactions
Verified
Journal Article
Open access
JGJoaquín Gracia-Morán
Joaquín Gracia-Morán
Luis-J. Saiz-AdalidLuis-J. Saiz-Adalid
Luis-J. Saiz-Adalid
JBJuan-Carlos Baraza-Calvo
Juan-Carlos Baraza-Calvo
DGDaniel Gil-Tomas
Daniel Gil-Tomas
PGPedro-J. Gil-Vicente
Pedro-J. Gil-Vicente
With the integration scale level reached in CMOS technology, memory systems provide a great storage capacity, but at the price of an augment in their fault rate. In this way, the probability of experiencing Single Cell Upsets or Multiple Cell Upsets have risen. Error Correction Codes (ECC) are broadly employed to protect memory systems. Though, the inclusion of an ECC in a computer system adds, in each memory word, some extra bits used to detect and/or correct errors. In addition, encoding and decoding circuitries must be added, introducing overheads in area, delay, and power consumption. Usually, when an ECC-based fault tolerance mechanism is designed, its fault tolerance properties cannot be modified. However, in some applications, current memory systems can suffer a variable fault rate during their operation. Thus, it seems very interesting that this mechanism would be able to adapt to these variable fault conditions. This work proposes an Adaptive Fault-Tolerant mechanism based on ECC. This mechanism can adapt to different fault conditions, being able to correct and/or detect single and multiple bits in error. The Adaptive Fault-Tolerant mechanism proposed uses a unique encoder, that is, it is not necessary to re-encode the data to change the error coverage.