In this modern era, the natural fibers usage in automobile and construction sectors has been increased. The goal of the current work was to investigate the fiber orientation effect on dynamic mechanical properties of hybrid Pineapple Leaf Fibre (PALF) hybridized with basalt reinforced epoxy composite at changing vibration frequencies. Hand Lay-up technique was used to manufacture the composites by keeping the unidirectional basalt fabric as an outer layer by keeping PALF as inner layer followed by static compression method. Tensile and flexural moduli were also determined apart from storage modulus (E′) and damping factor (tan δ) for different PALF fiber angles. The results exemplified that not only the storage modulus and loss factor but also glass transition temperature (Tg) as well found to increase with frequency and also the fiber orientation angle has a greater impact on dynamic and static properties.
The objective of the present study is to develop a low-cost hybrid composite using pineapple leaf fiber obtained from agro-waste as core and high modulus basalt fiber produced from volcanic rock as skin to analyze the impact of basalt fiber orientation (skin) on the tensile, flexural, and damping properties of the composite. Different composite samples were fabricated with PALF at 0º (aligned with the longitudinal direction) and with different basalt fiber orientations using the hand layup method. The findings showed that the laminate with PALF and basalt aligned in the longitudinal direction had the best flexural properties and storage modulus, while the sample with the basalt fiber oriented at 90° had the best tan delta (damping). The maximum variation in glass transition temperature due to change in fiber angle was noticed as ~3°C.