The residual stress field induced by interference-fit riveting in aircraft panel structures significantly affects the fatigue performance around the rivet holes. Common residual stress analytical models often overlook the non-uniformity of interference between the rivet and the hole, which impacts the applicability of these models. Addressing this issue, an analytical model of residual stress around the rivet hole is proposed for a typical single-riveted structure based on the thick-walled cylinder theory and Lame’s equations, considering the non-uniform interference along the axis of the rivet hole. This novel model is then extended to multi-riveted structures in fuselage panels. Using vector synthesis, analytical models for single-row double-rivets and double-row quadruple-rivets configurations were derived. The established analytical models provide a three-dimensional characterization of the residual stress field in typical riveted structures. Finally, the accuracy of the model is verified through X-ray diffraction experiments and FEM simulation results.
Analytical modeling of the squeezing force for aircraft wings and fuselage panels in the existing literature usually assumes uniform deformation of the rivets, while in reality, the deformation of the rivets is non-uniform. To achieve high-quality squeezing force modeling, this paper introduces Coulomb’s friction and four critical adjustments to the original equation: the non-uniform rivet/sheet interference along the sheet’s hole axial ordinate; the barreling effect when calculating the driven head’s volume; the spring-back of the driven head’s dimensions; the modified height of the driven head; and the modified sheet-hole expanded diameter considering the convex structure of the driven head. The calculated values of the proposed new model demonstrate an improved level of accuracy, particularly under squeeze ratios commonly encountered in the aerospace industry.
In aircraft panel assembly, the interference fit unevenly distributed along the axial direction of the rivet holes leads to an uneven stress–strain field around the rivet holes. The uneven stress–strain fields of single rivets, when accumulated through multiple rivets, result in overall bending and twisting deformation, severely impacting the assembly coordination quality of the panel. This study introduces a numerical model using a single row of multiple rivets to explore cumulative deformation during both sequential and changing order riveting. The results show that the deformation in sequential riveting is mainly bending-oriented towards the driven head side, with the maximum displacement exhibiting a fluctuating accumulation trend as the number of rivets increase. In contrast, a changing riveting order can lead to a reduction in deformation accumulation. To reveal the technological mechanism behind deformation accumulation during the riveting process, a model correlating to the residual stress field was established. It was indicated that the continuous increase in the maximum equivalent bending moment in the axial section is the primary factor leading to deformation accumulation. Based on this finding, a pre-bending suppression method aimed at reducing the local maximum equivalent bending moment was proposed. Numerical calculations and experimental results showed that the maximum displacement of the specimen was reduced by 73.27%, proving that this method can effectively suppress the cumulative increase in deformation.