27 April 2020 in ACS Energy Letters
22 April 2022 in Advanced Science
2D–3D mixed tin halide perovskites are outstanding candidate materials for lead‐free perovskite solar cells (PSCs) due to their improved stability and decreased trap density in comparison with their pure 3D counterparts. However, the mixture of multiple phases may lead to poor charge transfer across the films and limit the device efficiency. Here, a stacked quasi‐2D (down)–3D (top) double‐layered structure in perovskite films prepared via vacuum treatment is demonstrated, which can result in a planar bilayer heterojunction. In addition, it is found that the introduction of guanidinium thiocyanate (GuaSCN) additive can improve the crystallinity and carrier mobility in the 2D perovskite layer and passivate defects in the whole film, leading to a long carrier lifetime (>140 ns) in photoluminescence measurements. As a result, the PSCs show a high open circuit voltage (VOC) up to 1.01 V with a voltage loss of only 0.39 V, which represents the record values ever reported for tin‐based PSCs. The champion device exhibits a power conversion efficiency (PCE) of 13.79% with decent stability, retaining 90% of the initial PCE for 1200 h storage in N2‐filled glovebox.
1 September 2022 in Advanced Energy Materials
27 March 2021 in Advanced Science
Tin (Sn)‐based perovskites with favorable optoelectronic properties and ideal bandgaps have emerged as promising alternatives to toxic lead (Pb)‐based perovskites for photovoltaic applications. However, it is challenging to obtain high‐quality Sn‐based perovskite films by solution process. Here, liquid‐exfoliated 2D transition‐metal dichalcogenides (i.e., MoS2, WS2, and WSe2) with smooth and defect‐free surfaces are applied as growth templates for spin‐coated FASnI3 perovskite films, leading to van der Waals epitaxial growth of perovskite grains with a growth orientation along (100). The authors find that WSe2 has better energy alignment with FASnI3 than MoS2 and WS2 and results in a cascade band structure in resultant perovskite solar cells (PSCs), which can facilitate hole extraction and suppress interfacial charge recombination in the devices. The WSe2‐modified PSCs show a power conversion efficiency up to 10.47%, which is among the highest efficiency of FASnI3‐based PSCs. The appealing solution phase epitaxial growth of FASnI3 perovskite on 2D WSe2 flakes is expected to find broad applications in optoelectronic devices.
25 March 2020 in Chemistry – An Asian Journal
21 May 2024 in Advanced Materials
Tin (Sn) ‐based perovskite solar cells (PSCs) normally show low open circuit voltage due to serious carrier recombination in the devices, which can be attributed to the oxidation and the resultant high p‐type doping of the perovskite active layers. Considering the grand challenge to completely prohibit the oxidation of Sn‐based perovskites, a feasible way to improve the device performance is to counter‐dope the oxidized Sn‐based perovskites by replacing Sn2+ with trivalent cations in the crystal lattice, which however is rarely reported. Here, the introduction of Sb3+, which can effectively counter‐dope the oxidized perovskite layer and improve the carrier lifetime, is presented. Meanwhile, Sb3+ can passivate deep‐level defects and improve carrier mobility of the perovskite layer, which are all favorable for the photovoltaic performance of the devices. Consequently, the target devices yield a relative enhancement of the power conversion efficiency (PCE) of 31.4% as well as excellent shelf‐storage stability. This work provides a novel strategy to improve the performance of Sn‐based PSCs, which can be developed as a universal way to compensate for the oxidation of Sn‐based perovskites in optoelectronic devices.