With the rise of restrictions imposed by law for gases emission, several technologies both for petrodiesel (PD) or diesel engines are been applied, such as the sulfur reduction and the injection electronic command, followed of gases recirculation and/or after-treatment. The utilization of biofuels is considered as an interesting option for pollutants reduction. In this study was evaluated the performance on short duration tests (minor period than the factory indication of the lubricant lifespan) of the Diesel engine fueled with four vegetable oils. With the aim to select the most interesting oils for future evaluations in long duration tests. The analyzed variables were fuel consumption, power relative loss and opacity, for oils of linseed, crambe, rapseed, jatropha , with 100 °C preheating and engine work temperature (60 °C) comparing those with the PD. It was verified that the vegetable oils, on average, present a lower consumption than the PD for the cases of working without load, however with load, they presented higher consumption. In addiction were observed that the oils show a higher relative power loss in relation of PD and provides lower emission of particulate matter. Crambe and canola presented the best performance among the evaluated oils.
O presente trabalho teve o objetivo de desenvolver uma servoválvula de baixo custo, que respondesse a um sinal eletrônico de controle, para a aplicação de insumos líquidos a taxas variáveis. Depois de realizada pesquisa na literatura das opções de válvulas existentes para a dosagem de líquidos a baixas pressões, partiu-se para o desenvolvimento de uma válvula proporcional com acionamento mecânico por intermédio de um servomotor controlado eletronicamente. Uma vez desenvolvida a servoválvula, o sistema foi submetido a um conjunto de testes, realizados em bancada desenvolvida especificamente para esse fim, onde se procurou avaliar seu comportamento em termos de repetitividade, histerese e linearidade. Como resultados, obtiveram-se três curvas de vazão em função do percentual de abertura, descrevendo três incrementos de abertura e fechamento em duas pressões diferentes de trabalho. A servoválvula apresentou boa repetitividade, razoável histerese e curva tipicamente quadrática, bem como manteve a proposta de baixo custo. Esses resultados apresentaram-se bastante satisfatórios, uma vez que a não-linearidade e a histerese podem ser facilmente corrigidas por meio de software.