27 February 2018 in IEEE Transactions on Wireless Communications
We characterize a two tier heterogeneous network, consisting of classical sub-6 GHz macro cells, and multi radio access technology (RAT) small cells able to operate in sub-6 GHz and millimeter-wave (mm-wave) bands. For optimizing coverage and to balance loads, we propose a two-step mechanism based on two biases for tuning the tier and RAT selection, where the sub-6 GHz band is used to speed-up the initial access procedure in the mm-wave RAT. First, we investigate the effect of the biases in terms of signal-to-interference-plus-noise ratio (SINR) distribution, cell load, and user throughput. More specifically, we obtain the optimal biases that maximize either the SINR coverage or the user downlink throughput. Then, we characterize the cell load using the mean cell approach and derive upper bounds on the overloading probabilities. Finally, for a given traffic density, we provide the small cell density required to satisfy system constraints in terms of overloading and outage probabilities. Our analysis highlights the importance of deploying dual-band small cells, in particular, when small cells are sparsely deployed or in case of heavy traffic.
6 January 2021 in IEEE Open Journal of the Communications Society
This paper uses a stochastic geometry model-based approach to analyze the downlink performance of an indoor visible light communication (VLC) system with human blockages. The system performance is analyzed for a regular placement of light emitting diodes (LEDs) in a rectangular configuration. The proposed analysis is divided into two parts. In the first part, it is assumed that human blockages are static. The closed-form expression of the signal-to-noise ratio (SNR) at the receiver with static human blockages is derived. Further, the analysis is extended for the case where blockage mobility has also been considered. We compare the system performance in terms of received SNR for 4 and 8 LED configurations under predefined total power constraint. It is observed that at a lower density of human blockages in the room, the 4-LED configuration outperforms the 8-LED configuration. However, at a higher density of human blockages in the room, the 8-LED configuration outperforms the 4-LED configuration for the same total power constraint. Hence the proposed analysis will be useful for designing a VLC based indoor communication system wherein the system designer can switch between these two configurations depending on the number of blockages.
4 March 2021 in IEEE Communications Letters
We study the received signal strength indicator (RSSI)-based ranging performance of a cellular user in a millimeter-wave (mm-wave) network aided by reconfigurable intelligent surfaces (RISs). First, we propose an optimal RIS deployment strategy that minimizes the joint blockage probability of the user to the base station (BS) link and the user to the RIS link. Then, we provide a bound-based characterization of a ranging strategy in which the BS estimates the distance the user in the direct link in case it is in the line of sight (LOS) state, whereas in case the direct link is blocked, the BS estimates the user distance via the reflected, i.e., RIS-aided link. In literature, for maximizing the path-gain the RIS deployment is recommended to be in close proximity to the BS. In contrast, our study shows that in the presence of blockages, close locations of the RIS and the BS is sub-optimal.
19 October 2021 in IEEE Open Journal of Signal Processing
We propose an analytical framework based on stochastic geometry (SG) formulations to estimate a radar's detection performance under generalized discrete clutter conditions. We model the spatial distribution of discrete clutter scatterers as a homogeneous Poisson point process and the radar cross-section of each extended scatterer as a random variable of the Weibull distribution. Using this framework, we derive a metric called the radar detection coverage probability as a function of radar parameters such as transmitted power, system noise temperature and radar bandwidth; and clutter parameters such as clutter density and mean clutter cross-section. We derive the optimum radar bandwidth for maximizing this metric under noisy and cluttered conditions. We also derive the peak transmitted power beyond which there will be no discernible improvement in radar detection performance due to clutter limited conditions. When both transmitted power and bandwidth are fixed, we show how the detection threshold can be optimized for best performance. We experimentally validate the SG results with a hybrid of Monte Carlo and full wave electromagnetic solver based simulations using finite difference time domain (FDTD) techniques.
29 March 2021 in IEEE Open Journal of the Communications Society
Intelligent Reflecting Surfaces (IRSs) have recently emerged as a promising solution for realizing the smart radio environment concept by leveraging the characteristics of metamaterials and large antenna arrays. However, the existing works on IRS do not account for the transceiver impairments while analyzing the performance of IRS assisted wireless systems. This paper investigates the impact of transceiver hardware imperfections on the performance of IRS-assisted wireless systems. Specifically, we have analyzed the spectral efficiency (SE), the energy efficiency (EE) and the outage probability of IRS-assisted wireless systems by deriving their closed-form expressions and verifying them through simulation results. The results show the importance of modeling and compensating for hardware impairment as they significantly restrict the performance of such systems.
14 March 2022 in IEEE Transactions on Intelligent Transportation Systems
Visible light communication (VLC) has recently emerged as an affordable and scalable technology supporting very high data rates for short range vehicle-to-vehicle (V2V) communication. In this work, we advocate the use of vehicular-VLC (V-VLC) for basic safety messages (BSMs) dissemination in lieu of conventional vehicular radio frequency (V-RF) communication in road intersection applications, where the reception performance is affected by interference from the concurrent transmissions of other vehicles. We make use of stochastic geometry to characterize the interference from the same lane as well as the perpendicular lane for various network configurations, i.e., standalone V-VLC, stand-alone V-RF and hybrid V-VLC/V-RF network. Specifically, by modelling the interfering vehicles' locations as a spatial Poisson point process (PPP), we are able to capture a static two-dimensional road geometry as well as the impact of interference due to vehicles clustering in the vicinity of road intersection in terms of outage probability and throughput. In addition to above, the performance of spatial ALOHA and carrier sense multiple access with collision avoidance medium access control (CSMA/CA MAC) protocol for standalone V-VLC, standalone V-RF and hybrid V-VLC/V-RF network configuration for relaying BSMs at road intersection is also compared. The performance metrics such as delay outage rate (DOR) and information outage rate (IOR) are utilized to investigate the impact of latency associated with various network configurations. Our numerical results reveal that our proposed hybrid V-VLC/V-RF leads to significant improvement in terms of outage performance, throughput and latency as compared to stand-alone V-VLC or stand-alone V-RF network.