1 August 2024 in Physics of Fluids
Stall flutter is a large-amplitude, flow-induced limit cycle oscillation that poses a risk of structural failure of wings. In this paper, a numerical investigation is conducted to explore the mitigation of stall flutter using active surface morphing with a single-mode harmonic motion at a Reynolds number of 1000. The effects of oscillation position and phase on mitigation are evaluated based on the net energy gain of the airfoil over one oscillation cycle. The results show the effectiveness of active surface morphing in mitigating stall flutter, achieving a maximum of 46% reduction in energy obtained by the airfoil from the flow. The control effect is primarily attributed to the decrease in the aerodynamic moment peak during the pitch-up phase and the increase in the aerodynamic moment trough during the pitch-down phase. The former is essentially due to the large-scale clockwise vortex induced by the skin bulging in the pitch-up phase. The latter is fundamentally caused by the weakening of the trailing-edge vortex and the strengthening of the second leading-edge vortex. Finally, maps depicting the energy exchange between the flow and the airfoil system are presented to further demonstrate the control effectiveness of active surface morphing.
1 January 2026 in Physics of Fluids
Stall flutter mitigation is crucial to ensure the stability and safety of aeroelastic systems. Our previous research has shown that active surface morphing can effectively reduce the energy transferred from the flow to the pitching airfoil, thereby mitigating stall flutter. This study aims to provide new quantitative insights into the underlying physical mechanisms of this control strategy. The adaptive variable density clustering-based moment partitioning method is implemented to quantitatively assess the contributions of distinct vortical structures to aerodynamic moments. The analysis reveals two primary mechanisms by which active surface morphing reduces the energy transferred to the pitching airfoil: (1) a delay and reduction of the moment peak during the pitch-up phase, driven by the phase lag in leading-edge vortex development and the formation of the shear-layer vortex, and (2) a significant increase in the moment trough during the pitch-down phase, resulting from the reinforcement of the second leading-edge vortex and the weakening of the trailing-edge vortex. These findings offer new insights into the effectiveness of active surface morphing for stall flutter control.
11 September 2023 in Ocean Engineering
1 February 2023 in Physics of Fluids
Flow-induced vibrations can be utilized to harvest energy for micro-air vehicles (MAVs). A flexible membrane wing with an embedded piezoelectric energy harvester at an angle of attack of 12° and the Reynolds number (Re) of 8000 is studied by numerical simulations. An aero-electro-mechanical model is established to investigate the effect of the leading-edge (LE) and trailing-edge (TE) geometries on the fluid–structure interaction (FSI) modes, aerodynamic performance, and energy harvesting performance. A new correction method of structural frequency is proposed that it considers both the aerodynamic stiffness effect and the added mass effect corresponding to a specific FSI mode of interest. The results suggest that the mode transition accompanied by the performance changes is essentially caused by the FSI state transition, which is distinguished by the corrected structural frequency and the vortex shedding one. With the Fourier mode decomposition (FMD) method, the modes of membrane vibration and pressure fluctuation become clear. The LE geometry is found to affect the FSI state by influencing the leading-edge vortices, which further triggers the mode transition.
22 June 2026 in Journal of Fluid Mechanics
Stall flutter is suppressed on a NACA0012 airfoil at a low Reynolds number ( Re equals $=$ 1000–5000) through a counter-intuitive strategy: targeted enhancement of the second leading-edge vortex (sLEV) via phase-optimised surface morphing, in contrast to the conventional paradigm of suppressing vortices. Two distinct flow topologies are identified: (I) boundary-layer-eruption-induced leading-edge vortex (LEV) shedding at large amplitudes ( upper A Subscript alpha $A_\alpha$ ≥ 10°), accompanied by sLEV formation, and (II) bluff-body-type shedding at small amplitudes ( upper A Subscript alpha $A_\alpha$ ≤ 5°) without sLEV. A new circulation scaling is introduced to identify topology I, which drives severe structural oscillations. Flow-structure analysis reveals a novel sLEV–trailing-edge vortex (TEV) interaction mechanism that mitigates stall flutter: strengthening sLEV triggers a chain effect that weakens the TEV, elevates the aerodynamic moment trough and disrupts the feedback loop sustaining the oscillation. An energy-based map is constructed to characterise the boundary of stall flutter across control parameters and to enable rapid prediction of control performance. By combining the clustering-based vortex-induced load partitioning method with this energy framework, an optimal phase indicator is established: actuation synchronised with the peak sLEV-induced moment consistently yields near-optimal control performance, providing a direct quantitative link between pre-control flow features and optimal control parameters. A phase-locked-loop strategy further demonstrates that surface morphing with an amplitude an order of magnitude smaller than the characteristic LEV scale can nonetheless achieve complete suppression of stall flutter within the topology I regime. These findings not only demonstrate the efficacy of surface morphing control but also offer new physical insight into stall flutter dynamics and their precision control via targeted vortex interactions.
15 October 2026 in Journal of Fluids and Structures