1 March 2011 in Corrosion Science
1 May 2021 in Progress in Materials Science
1 September 2016 in Electrochimica Acta
The corrosion of high level nuclear waste containers under permanent disposal conditions can occur via a number of processes which change in importance as the environment within a deep geologic repository evolves from oxic to anoxic. The container design involves a copper coating on a steel vessel. The characteristics of these coatings are being assessed using standard analytical methods, including microscopy and electron backscatter diffraction. The corrosion processes on the surface of the coatings and at through-coating defects are also being investigated electrochemically. Although minor differences exist, the surface corrosion of cold sprayed and electrodeposited coatings generally exhibited similar corrosion behaviour to standard wrought copper. Corrosion at the base of a simulated through-coating defect in a cold-sprayed coating was found to proceed via galvanic coupling to oxygen reduction on the coating surface. Besides accumulating damage at the base of the defect, corrosion propagated along the copper/steel interface, most likely a consequence of the damage inflicted during the deposition process
28 April 2017 in Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control
The corrosion behaviour of nuclear fuel waste containers depends on the near-field environmental conditions, which may differ significantly from those in the host rock, especially during the early thermal-saturation transient phase. Although it is widely accepted that, in broad terms, the repository evolves from initially warm and oxidising to cool and anoxic in the long term, it is important to understand the detailed nature of the near-field environment in order to predict the corrosion behaviour of the container with confidence. Available information about the near-field environment is briefly reviewed and the expected time dependence of various environmental parameters is defined for a bentonite-backfilled deep geological repository. Although the focus is on a Canadian repository design for copper-coated containers in crystalline or sedimentary host rocks, the discussion is broadly applicable to a variety of container materials and repository designs and locations. Some implications for the corrosion behaviour of the container are also considered. This paper is part of a supplement on the 6th International Workshop on Long-Term Prediction of Corrosion Damage in Nuclear Waste Systems.
28 April 2017 in Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control
13 June 2014 in Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control
Within ongoing work, Canada's Nuclear Waste Management Organization (NWMO) is demonstrating that copper coatings can be developed as viable corrosion barriers for used fuel nuclear containers, emplaced in a deep geological repository. As a means of assessing container design and feasibility, coated samples, manufactured via cold spray and electro-deposition have been produced and characterised. Corrosion testing for coated samples and wrought samples reveals that cold spray samples behave similar to wrought samples in 3 mol L21NaCl solution at room temperature. When oxygen is absent, corrosion has not been observed.Peer reviewed: YesNRC publication: Ye