20 May 2002 in Physical Review D
The analyzing powers of and were measured using an incident transversely polarized proton beam at the Brookhaven Alternating Gradient Synchrotron. A magnetic spectrometer measured inclusive asymmetries on a hydrogen and a carbon target. An elastic polarimeter with a target measured pp elastic-scattering asymmetries to determine the beam polarization using published data for the pp elastic analyzing power. Using the beam polarization determined from the elastic polarimeter and asymmetries from the inclusive spectrometer, analyzing powers for were determined in the and ranges and respectively. The analyzing power results are similar in both sign and character to other measurements at 200 and confirming the expectation that high-energy pion inclusive analyzing powers remain large and relatively energy independent. This suggests that pion inclusive polarimetry may be a suitable method for measuring future beam polarizations at BNL RHIC or DESY HERA. Analyzing powers of and produced on hydrogen and carbon targets are the same. Various models to explain inclusive analyzing powers are also discussed.
1 March 2003 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
25 May 1998 in Physical Review Letters
A coherent spin resonance excited by an rf dipole was used to overcome depolarization due to intrinsic spin resonances at the Alternating Gradient Synchrotron (AGS) at Brookhaven National Laboratory. We found that our data are consistent with a full spin flip of a polarized proton beam, without emittance growth, at and , by adiabatically exciting a vertical coherent betatron oscillation using a single rf dipole magnet. The interference pattern observed between the intrinsic spin resonance and the coherent spin resonance agrees well with multiparticle spin simulations based on a simple two-resonance model. The interference pattern can be used for beam diagnostics.
1 February 2010 in Review of Scientific Instruments
As part of a new heavy ion preinjector that will supply beams for the Relativistic Heavy Ion Collider and the National Aeronautics and Space Administration Space Radiation Laboratory, construction of a new electron beam ion source (EBIS) is now being completed. This source, based on the successful prototype Brookhaven National Laboratory Test EBIS, is designed to produce milliampere level currents of all ion species, with . Among the major components of this source are a 5 T, 2-m-long, 204 mm diameter warm bore superconducting solenoid, an electron gun designed to operate at a nominal current of 10 A, and an electron collector designed to dissipate of peak power. Careful attention has been paid to the design of the vacuum system, since a pressure of is required in the trap region. The source includes several differential pumping stages, the trap can be baked to 400 C, and there are non-evaporable getter strips in the trap region. Power supplies include a 15 A, 15 kV electron collector power supply, and fast switchable power supplies for most of the 16 electrodes used for varying the trap potential distribution for ion injection, confinement, and extraction. The EBIS source and all EBIS power supplies sit on an isolated platform, which is pulsed up to a maximum of 100 kV during ion extraction. The EBIS is now fully assembled, and operation will be beginning following final vacuum and power supply tests. Details of the EBIS components are presented.
1 February 2008 in Review of Scientific Instruments
The idea of direct plasma injection scheme (DPIS) was proposed in 2000. This new technique has been studied and proven to accelerate intense ion beams. To provide medium mass ions with highly charged states, small tabletop solid lasers were used for plasma production. Based on the measured plasma properties, aluminum and carbon ions were accelerated with more than 60mA of current. The next experiments will use an radio frequency quadrupole designed for q∕m=1∕6 and explore beam productions using targets up to silver, and future work will explore production up to uranium. The DPIS has been established and is ready to be used with various accelerators which require pulsed high current, high charge state ion beams.
1 May 2004 in Review of Scientific Instruments
The feasibility of a “direct injection scheme” using Nd–yttritium–aluminum–garnet laser has been studied experimentally. The relationship between charge distribution and laser power density was measured. The obtained yield rate of was 46.8% at the peak current pulse with laser intensity. The current dependence of the distance from the target at this intensity was measured. The peak current of will be 60 mA with φ4.8 mm extraction aperture. It was found from the input beam condition simulation by the code PTEQ–HI that high current (from 12 to 28.6 mA) can be accelerated by the TIT–RFQ.