17 January 2020 in Journal of Fluid Mechanics
Two-dimensional (2-D) numerical simulations based on the Eulerian–Lagrangian method that take droplet break-up into account are conducted to clarify the mean structure of gaseous detonation laden with a dilute water spray. The premixed mixture is a slightly diluted stoichiometric hydrogen–oxygen mixture at low pressure. The simulated results are analysed via 2-D flow fields and statistical Favre spatiotemporal averaging techniques. Gaseous detonation with water droplets (WD) propagates stably with a velocity decrease compared with the dry Chapman–Jouguet speed. The mean structure of gaseous detonation with dilute water spray shares a similar structure as the one without water spray. However, the hydrodynamic thickness is changed due to the interaction with water spray. Overall interphase exchanges (mass, momentum and energy) that take place within the hydrodynamic thickness induce a decrease of the detonation velocity and lower the level of fluctuations downstream of the mean leading shock wave. Droplet break-up occurs downstream of the induction zone and in our case, the water vapour from the evaporation of water spray does not affect the reactivity of gaseous detonation. The laminar master equation for gaseous detonation laden with inert WD shows that the hydrodynamic thickness should rely on the gaseous sound speed, and works well as the working mixture is weakly unstable and its cellular structure is regular. The droplet flow regimes and break-up modes have also been determined. The characteristic lengths of detonation and interphase exchanges have been ordered under the present simulation conditions and have been shown to be intimately intertwined.
8 April 2024 in Combustion and Flame
16 March 2021 in Shock Waves
21 January 2015 in Combustion Science and Technology
A novel method for purging the residual hot burned gas in the cyclic operation of a pulse detonation combustor (PDC) was developed. With this new method, called the liquid-purge (LIP) method, residual hot burned gas is purged by injecting liquid droplets into the PDC. The injected liquid droplets are rapidly vaporized after the combustion of the detonable mixture. The vaporization of liquid is an endothermic phase transition accompanied by a roughly thousand-fold volume expansion. Consequently, the residual hot burned gas is cooled and pushed outward—in other words, purged. The accuracy of the injection of liquid droplets is controlled with a high-performance automotive fuel injector, enabling high-frequency operation of a PDC. In demonstration experiments, a PDC was successfully operated at the frequency of up to 350 Hz, using ethylene as fuel and pure oxygen as the oxidizer. These were supplied to the PDC in the valveless mode, and liquid water was used for the purge. In the analysis of the results, the hypothetical thickness of the water-vapor layer created in the vicinity of the closed end of the PDC was evaluated. This hypothetical thickness is proportional to the injected water mass per unit cross-sectional area of the PDC, and is a scale length of the separation distance between the residual hot burned gas and the fresh fuel and oxidizer. The results suggested that the hypothetical thickness of the water-vapor layer was an important governing parameter of the purge process.
1 December 2015 in Journal of Thermal Spray Technology
8 August 2023 in Journal of Fluid Mechanics
Two-dimensional numerical simulations with the particle tracking method were conducted to analyse the dispersion behind the detonation front and its mean structure. The mixtures were 2H $_2$ –O $_2$ –7Ar and 2H $_2$ –O $_2$ of increased irregularity in ambient conditions. The detonation could be described as a two-scale phenomenon, especially for the unstable case. The first scale is related to the main heat release zone, and the second where some classical laws of turbulence remain relevant. The dispersion of the particles was promoted by the fluctuations of the leading shock and its curvature, the presence of the reaction front, and to a lesser extent transverse waves, jets and vortex motion. Indeed, the dispersion and the relative dispersion could be scaled using the reduced activation energy and the $\chi$ parameter, respectively, suggesting that the main mechanism driving the dispersion came from the one-dimensional leading shock fluctuations and heat release. The dispersion within the induction time scale was closely related to the cellular structure, particles accumulating along the trajectory of the triple points. Then, after a transient where the fading transverse waves and the vortical motions coming from jets and slip lines were present, the relative dispersion relaxed towards a Richardson–Obukhov regime, especially for the unstable case. Two new Lagrangian Favre average procedures for the gaseous detonation in the instantaneous shock frame were proposed and the mean profiles were compared with those from Eulerian procedure. The characteristic lengths for the detonation were similar, meaning that the Eulerian procedure gave the mean structure with a reasonable accuracy.