29 March 2020 in Vehicle System Dynamics
The state of the art of modelling, control, and optimisation is discussed for automated road vehicles that may utilise wireless vehicle-to-everything (V2X) connectivity. The appropriate tools to address safety and energy efficiency are described and the effects on traffic dynamics are highlighted. Finally, the economical and societal impacts of the deployment of connected and automated vehicles are discussed.
27 May 2010 in IEEE Transactions on Intelligent Transportation Systems
It is well established in the literature that secondary tasks adversely affect driving behavior. Previous research has focused on discovering the general trends by analyzing the average effects of secondary tasks on a population of drivers. This paper conjectures that there may also be individual effects, i.e., different effects of secondary tasks on individual drivers, which may be obscured within the average behavior of the population, and proposes a model-based approach to analyze them. Specifically, a radial-basis neural-network-based modeling framework is developed to characterize the normal driving behavior of a driver when driving without secondary tasks. The model is then used in a scenario of driving with a secondary task to predict the hypothetical actions of the driver, had there been no secondary tasks. The difference between the predicted normal behavior and the actual distracted behavior gives individual insight into how the secondary tasks affect the driver. It is shown that this framework can help uncover the different effects of secondary tasks on each driver, and when used together with support vector machines, it can help systematically classify normal and distracted driving conditions for each driver.
10 November 2017 in Vehicle System Dynamics
This paper presents a nonlinear model predictive control (MPC) formulation for obstacle avoidance in high-speed, large-size autono-mous ground vehicles (AGVs) with high centre of gravity (CoG) that operate in unstructured environments, such as military vehicles. The term ‘unstructured’ in this context denotes that there are no lanes or traffic rules to follow. Existing MPC formulations for passenger vehicles in structured environments do not readily apply to this context. Thus, a new nonlinear MPC formulation is developed to navigate an AGV from its initial position to a target position at high-speed safely. First, a new cost function formulation is used that aims to find the shortest path to the target position, since no reference trajectory exists in unstructured environments. Second, a region partitioning approach is used in conjunction with a multi-phase optimal control formulation to accommodate the complicated forms the obstacle-free region can assume due to the presence of multiple obstacles in the prediction horizon in an unstructured environment. Third, the no-wheel-lift-off condition, which is the major dynamical safety concern for high-speed, high-CoG AGVs, is ensured by limiting the steering angle within a range obtained offline using a 14 degrees-of-freedom vehicle dynamics model. Thus, a safe, high-speed navigation is enabled in an unstructured environment. Simulations of an AGV approaching multiple obstacles are provided to demonstrate the effectiveness of the algorithm.
1 September 2018 in Applied Energy
31 August 2016 in Vehicle System Dynamics
This paper investigates the level of model fidelity needed in order for a model predictive control (MPC)-based obstacle avoidance algorithm to be able to safely and quickly avoid obstacles even when the vehicle is close to its dynamic limits. The context of this work is large autonomous ground vehicles that manoeuvre at high speed within unknown, unstructured, flat environments and have significant vehicle dynamics-related constraints. Five different representations of vehicle dynamics models are considered: four variations of the two degrees-of-freedom (DoF) representation as lower fidelity models and a fourteen DoF representation with combined-slip Magic Formula tyre model as a higher fidelity model. It is concluded that the two DoF representation that accounts for tyre nonlinearities and longitudinal load transfer is necessary for the MPC-based obstacle avoidance algorithm in order to operate the vehicle at its limits within an environment that includes large obstacles. For less challenging environments, however, the two DoF representation with linear tyre model and constant axle loads is sufficient.
18 April 2019 in Journal of the Electrochemical Society
This paper presents a 2D, fully coupled and comprehensive transient model that accounts for micro-structural features of various cell layers. The model benefits from state of the art sub-models for reaction kinetics and incorporates the polymer relaxation dynamics. Furthermore, a mixed wettability model is utilized to simulate the transient two phase conditions in the porous layers. The model is validated with transient experimental data under various conditions. A comprehensive simulation study is presented to investigate the impact of operating temperature and relative humidity on the transient response. The effects of cathode Pt loading and operation mode, i.e., current control versus voltage control, are also studied. The cell response is found to be dominated by water transport through its thickness. Additionally, it is found that reducing the Pt loading can influence the performance by changing the water balance in the cell, which has rarely been highlighted in the literature. In particular, at low temperature more water is transported toward the anode when the cathode Pt loading is reduced, since the resistance to water back diffusion is lowered with reduced thickness of the cathode catalyst layer. This trend is reversed at a higher temperature due to increased volumetric heat generation with reduced thickness. The model can help in understanding various transport phenomena and is expected to be useful for inspecting spatio-temporal temperature, potential, and species distributions across the cell’s thickness and optimizing the cell design and choice of materials.