Recently, simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs) have emerged as a novel technology that provides $360^{\circ }$ coverage and new degrees-of-freedom (DoFs). They are also capable of manipulating signal propagation and simultaneous wireless information and power transfer (SWIPT). This paper introduces a novel STAR-RIS-aided secure SWIPT system for downlink multiple input single output rate-splitting multiple access (RSMA) networks. The transmitter concurrently communicates with the information receivers (IRs) and sends energy to untrusted energy receivers (UERs). The UERs are also capable of wiretapping the IR streams. We assume that the channel state information (CSI) of the IRs is known at the information transmitter, but only imperfect CSI for the UERs is available at the energy transmitter. By exploiting RSMA, the base station splits the messages of the IRs into common and private parts. The former is encoded into a common stream that can be decoded by all IRs, while the private messages are individually decoded by their respective IRs. We find the precoders and STAR-RIS configuration that maximizes the achievable worst-case sum secrecy rate of the IRs under a total transmit power constraint, a sum energy constraint for the UERs, and subject to constraints on the transmission and reflection coefficients. The formulated problem is non-convex and has intricately coupled variables. To tackle this challenge, a suboptimal two-step iterative algorithm based on the sequential parametric convex approximation method is proposed. Simulations demonstrate that the RSMA-based algorithm implemented with a STAR-RIS enhances both the rate of confidential information transmission and the total spectral efficiency. Furthermore, our method surpasses the performance of both orthogonal multiple access (OMA) and non-OMA (NOMA).
26 June 2007 in EURASIP Journal on Advances in Signal Processing
This paper investigates the implementation of a novel wireless local positioning system (WLPS). WLPS main components are: (a) a dynamic base station (DBS) and (b) a transponder, both mounted on mobiles. The DBS periodically transmits ID request signals. As soon as the transponder detects the ID request signal, it sends its ID (a signal with a limited duration) back to the DBS. Hence, the DBS receives noncontinuous signals periodically transmitted by the transponder. The noncontinuous nature of the WLPS leads to nonstationary received signals at the DBS receiver, while the periodic signal structure leads to the fact that the DBS received signal is also cyclostationary. This work discusses the implementation of linear constrained minimum variance (LCMV) beamforming at the DBS receiver. We demonstrate that the nonstationarity of the received signal causes the sample covariance to be an inaccurate estimate of the true signal covariance. The errors in this covariance estimate limit the applicability of LCMV beamforming. A modified covariance matrix estimator, which exploits the cyclostationarity property of WLPS system is introduced to solve the nonstationarity problem. The cyclostationarity property is discussed in detail theoretically and via simulations. It is shown that the modified covariance matrix estimator significantly improves the DBS performance. The proposed technique can be applied to periodic-sense signaling structures such as the WLPS, RFID, and reactive sensor networks.
4 October 2024 in IEEE Transactions on AgriFood Electronics
In this article, we investigate an intelligent ground penetrating radar (GPR) that facilitates root-zone soil moisture estimation, a key parameter in precision agriculture. To create an intelligent GPR, we must train machine learning (ML) methods applied to the GPR-received signal. This process requires a large number of labeled GPR data that would be time-consuming and labor-intensive if created via field measurements. This article uses gprMAX software to emulate drone-coupled GPR received signal to generate large-scale data for training ML models. The data are created via a 1.5 GHz Ricker waveform considering a three-layer soil consistent with a realistic soil horizon model. The approach is structured as follows: first, we generate a synthetic dataset using gprMAX. Feature engineering techniques are then employed to extract meaningful components from the GPR signals, followed by a rigorous selection process to identify the most effective ML model for soil moisture prediction. Finally, we validate our model by integrating synthetic data with real GPR data collected at the SoilX lab at Worcester Polytechnic Institute, enhancing prediction accuracy and generalization capability. Our proposed model achieves an overall average root-mean-squared error of 0.5%, and 1.56 cm for moisture and depth estimations, respectively. The proposed intelligent GPR, when installed on a drone, enables high horizontal (e.g., 10 m) and vertical (e.g., 1.5 cm) resolution and high penetration depth (beyond 2 m) megafarm root-zone 3-D moisture map creation. Thus, it offers much higher capabilities when compared to traditional methods, such as synthetic aperture radar and satellite imaging. These results facilitate efficient farming practices, such as optimizing irrigation models, for better crop yields and food security.
30 January 2024 in IEEE Transactions on Vehicular Technology
This paper introduces adversarial attacks targeting a Graph Neural Network (GNN)-based radio resource management system in point-to-point (P2P) communications. Our focus lies on perturbing the trained GNN model during the test phase, specifically targeting its vertices and edges. To achieve this, four distinct adversarial attacks are proposed, each accounting for different constraints, aiming to manipulate the behavior of the system. The proposed adversarial attacks are formulated as optimization problems, aiming to minimize the system's communication quality. The efficacy of these attacks is investigated against the number of users, signal-to-noise ratio (SNR), and adversary power budget. Furthermore, we address the detection of such attacks from the perspective of the Central Processing Unit (CPU) of the system. To this end, we formulate an optimization problem that involves analyzing the distribution of channel eigenvalues before and after the attacks are applied. This formulation results in a Min-Max optimization problem, allowing us to detect the presence of attacks. Through extensive simulations, we observe that in the absence of adversarial attacks, the eigenvalues conform to Johnson's SU distribution. However, the attacks significantly alter the characteristics of the eigenvalue distribution, and in the most effective attack, they even change the type of the eigenvalue distribution.
9 February 2021 in IEEE Transactions on Wireless Communications
This paper proposes and analyses a set of novel and optimum multi-streaming techniques for mmWave multi-input multi-output systems. It formulates an optimization problem that enables exploiting available uncorrelated paths between the transmitter (Tx) and the receiver (Rx) to enhance the system throughput. In the proposed approach, antenna arrays at Tx/Rx are modeled as a Bipartite graph. Next, two bi-clustering algorithms are applied to the graph to simultaneously cluster antenna elements at Tx and Rx. In addition, the paper shows how the selection of subchannels and their corresponding subantenna arrays can be reduced to a variant of the graph coloring problem, based on which, two algorithms are proposed to find the optimum subchannels and subantenna arrays. Moreover, the paper defines two new beamforming methods and proves that those methods satisfy constant modulus and total power constraints. The first modified beamforming method uses singular vectors (SVs) of subchannels between Tx/Rx and incorporates the Power Iteration algorithm to decrease singular value decomposition complexity. The second newly proposed beamforming method finds precoders/combiners without using SVs which reduces the computational complexity. Performance evaluations in terms data streaming sum-rate demonstrate that the proposed technique increases the throughput using a low processing complexity.