1 October 2007 in IEEE International Ultrasonics Symposium
Our experimental setup for ultrasound computer tomography (USCT) has a cylindrical aperture with a diameter of 18 cm and height of 15 cm. In this setup ultrasound can travel over long distances up to 50 cm. Phase aberration due to speed of sound variations cause many pulses not to overlap in the reflectivity reconstruction. 3D speed of sound (SOS) maps were calculated using the recorded data and applied for correction. Due to a sparse sampling of the received transmission signals, the resulting speed of sound maps are noisy and of low detail. But the accuracy of the average speed of sound is sufficient for phase aberration correction of the reflection images down to object size of approx. 1 mm and increases the image quality significantly. Our work shows that high resolution USCT is not possible without phase aberration correction using SOS information.
19 September 2019 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Whole breast ultrasound scanning systems are used to screen a women’s breast for suspicious lesions. Typically, the transducers are located at fixed positions at relatively large distances from the breast to avoid any contact with the breast. Unfortunately, these large distances give rise to large spatial domains to be imaged. These large domains hamper the applicability of imaging by inversion. To reduce the size of the spatial computational domain, we present a two-dimensional redatuming method based on Hankel decomposition of the measured field. With this method, the field measured over an arbitrary-shaped closed curve can be redatumed to a new curve enclosing a smaller spatial domain. Additional advantages of the proposed method are that it allows to account for the finite size and orientation of a transducer and that it is robust to noise. The proposed method is successfully validated using synthetic and measured data and the results show that the recorded field can be redatumed to any position in the embedding.