1 January 2025 in IEEE Transactions on Pattern Analysis and Machine Intelligence
We introduce a structured light system that enables full-frame 3D scanning at speeds of 1000 fps, four times faster than the previous fastest systems. Our key innovation is the use of a custom acousto-optic light scanning device capable of projecting two million light planes per second. Coupling this device with an event camera allows our system to overcome the key bottleneck preventing previous structured light systems based on event cameras from achieving higher scanning speeds-the limited rate of illumination steering. Unlike these previous systems, ours uses the event camera's full-frame bandwidth, shifting the speed bottleneck from the illumination side to the imaging side. To mitigate this new bottleneck and further increase scanning speed, we introduce adaptive scanning strategies that leverage the event camera's asynchronous operation by selectively illuminating regions of interest, thereby achieving effective scanning speeds an order of magnitude beyond the camera's theoretical limit.
4 December 2025 in ACM Transactions on Graphics
We present a high-speed underwater optical backscatter communication technique based on acousto-optic light steering. Our approach enables underwater assets to transmit data at rates potentially reaching hundreds of Mbps, vastly outperforming current state-of-the-art optical and underwater backscatter systems, which typically operate at only a few kbps. In our system, a base station illuminates the backscatter device with a pulsed laser and captures the retroreflected signal using an ultrafast photodetector. The backscatter device comprises a retroreflector and a 2 MHz ultrasound transducer. The transducer generates pressure waves that dynamically modulate the refractive index of the surrounding medium, steering the light either toward the photodetector (encoding bit 1) or away from it (encoding bit 0). Using a 3-bit redundancy scheme, our prototype achieves a communication rate of approximately 0.66 Mbps with an energy consumption of ≤ 1 μJ/bit, representing a 60× improvement over prior techniques. We validate its performance through extensive laboratory experiments in which remote underwater assets wirelessly transmit multimedia data to the base station under various environmental conditions.
9 November 2026 in ACM Transactions on Graphics
We present a continuous-wave time-of-flight (CW-ToF) sensing system capable of megahertz-rate depth measurements using a free-space laser and commodity radio-frequency (RF) communication hardware. Existing highspeed optical displacement and vibration sensing systems typically rely on optical interferometry or specialized heterodyne electronics, making them complex and expensive to deploy. We instead show that commodity software-defined radios (SDRs) can serve as a programmable optical sensing backend by jointly performing laser modulation and RF demodulation of signals measured by a fast photodiode. This architecture enables direct phase-based depth estimation at megahertz temporal rates without requiring optical interferometry. Because both the modulation frequency and readout pipeline are fully programmable in software, the system allows flexible trade-offs between depth range, precision, and temporal bandwidth. The resulting sensor supports high-speed depth and vibration measurements, enabling applications such as monitoring rapidly moving mechanical systems, and reconstructing acoustic signals from vibrating surfaces. We experimentally evaluate a prototype system across multiple sensing scenarios and demonstrate submillimeter depth sensitivity at megahertz sampling rates, while analyzing practical limitations including noise, drift, and hardware constraints. Our results show that commodity RF hardware can enable low-cost, high-speed optical depth sensing , opening new opportunities for computational imaging and dynamic scene analysis.