Sandhya Chandravanshi

Sandhya Chandravanshi

Auto-generated profile, based on publicly available information

Sandhya Chandravanshi

Centre for Wireless Innovation (CWI), Institute of Electronics Communications and Information Technology, Queen’s University Belfast, Belfast BT3 9DT, Northern Ireland, UK

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 March 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
SCSandhya Chandravanshi
Sandhya Chandravanshi
SSSanchari Sen Sarma
Sanchari Sen Sarma
MAMohammad Jaleel Akhtar
Mohammad Jaleel Akhtar
A triple band differential rectenna for RF energy harvesting applications is proposed in this paper. The rectenna is designed to operate in frequency bands of UMTS (2.1 GHz), lower WLAN/ Wi-Fi (2.4-2.48 GHz) and WiMAX (3.3-3.8 GHz). For designing the proposed rectenna, firstly a differentially fed multi-band slot antenna, which works as the front-end receiving unit, is designed, fabricated and tested to check its performance. It is observed that a peak antenna gain of 7 dBi, 5.5 dBi and 9.2 dBi is achieved at 2 GHz, 2.5 GHz and 3.5 GHz, respectively. In the next step, a triple band differential rectifier is designed using the Villard voltage doubler where interdigital capacitors (IDC) in lieu of lumped components are used. The full rectifier circuit comprising of the rectifying unit and impedance matching circuit is fabricated and tested to check its performance in the desired bands. The peak RF-DC conversion efficiency of 68% is obtained using 3-tone measurement. In the final stage, both antenna and the rectifier circuit are integrated through SMA connecter in order to implement the proposed rectenna. Measurement of the proposed rectenna shows an approximate maximum efficiency of 53% at 2 GHz, 31% at 2.5 GHz and 15.56% at 3.5 GHz.

9 February 2021 in IEEE Access
Verified
Journal Article
Open access
SCSandhya Chandravanshi
Sandhya Chandravanshi
KKKranti Kumar Katare
Kranti Kumar Katare
MAM. J. Akhtar
M. J. Akhtar
This paper presents a novel cylindrical shaped dual-band flexible rectenna capable of harvesting RF energy from number of RF sources available in the entire azimuth plane. The proposed configuration is an array of four identical dual-band rectenna subsystems, printed on the lightweight flexible substrate. Here, each rectenna subsystem comprises of a dual-ring shaped dual-band monopole antenna and a dual-band rectifying circuit. The designed topology is good for popular bands of LTE 1.8 GHz and Wi-Fi 2.45 GHz. The robustness of the designed antenna in the proposed cylindrical shaped rectenna is also verified by testing it for different bending angles in the H-plane by simulation as well as measurement. The bending performance is tested for the antenna using S11 and farfield radiation pattern. Further, for extracting maximum RF signals in the entire azimuth plane, these four identical antennas are backed by a wide-band artificial magnetic conductor (AMC) placed in the inner region of the cylinder. The fabricated single rectenna unit is capable of converting power with 40% efficiency at very low input RF power -12 dBm. Finally, the overall rectenna array is fabricated and validated through measurements using two different test antennas as a RF sources in the real environment of lab. The proposed light weight, rectenna printed on a flexible substrate can extract RF signals from a number of randomly distributed RF sources simultaneously, while maintaining the overall compact configuration.

30 July 2019 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
KKKranti Kumar Katare
Kranti Kumar Katare
SCSandhya Chandravanshi
Sandhya Chandravanshi
ASAbhishek Sharma
Abhishek Sharma
ABAnimesh Biswas
Animesh Biswas
MAM. Jaleel Akhtar
M. Jaleel Akhtar
This paper presents a novel anisotropic metasurface based integrated antenna system to facilitate dual-polarized fan-beam patterns with independent beam-scanning ability. In the proposed configuration, the antenna subsystem comprises of a specially designed differentially fed microstrip patch antenna (source antenna) along with a polarization rotator (PR). The differential antenna arrangement is realized using a square shaped microstrip patch capacitively coupled with two metallic strips, which are connected to a specially designed wide band hybrid coupler using two metallic vias for the microstrip feeding. This source antenna is loaded with a polarization rotator (PR) by placing it at a height of 0.35λ0 from the radiating aperture. The PR is comprised of two identical metallic layer patterns, separated by two substrates. Depending upon the relative orientation of these layers, the polarization of the linearly polarized impinging spherical electromagnetic (EM) waves (originating from the source antenna) either remains preserved or gets rotated by 90° while transmitting through this PR. After realizing the antenna subsystem, a novel anisotropic metasurface (AMS) lens is designed and placed above the PR. The proposed AMS lens is realized by integrating two cylindrical MS (CMS) lenses, CMSY and CMSX. This integration provides a unique phase profile to the AMS lens, thus introducing appropriate phase correction to the incident orthogonally polarized spherical EM waves along their respective polarization direction. The proposed configuration of AMS lens thus results into formation of the independent dual-polarized fan-beam radiation beams. Finally, the steering of the generated fan-beams along the direction of their respective polarization is facilitated using the proposed system by translating the AMS lens parallel to the source antenna.

6 January 2020 in International Journal of RF and Microwave Computer-Aided Engineering
Verified
Journal Article
Closed access
PDF file
SCSandhya Chandravanshi
Sandhya Chandravanshi
MAM. J. Akhtar
M. J. Akhtar

1 December 2016
Verified
Conference Paper
Closed access
SSSanchari Sen Sarma
Sanchari Sen Sarma
SCSandhya Chandravanshi
Sandhya Chandravanshi
MAM. Jaleel Akhtar
M. Jaleel Akhtar
A triple band differential rectifier unit for RF energy harvesting applications is proposed in this paper. The rectifier is designed to operate in the frequency bands where some popular ambient RF sources like the UMTS (2.1 GHz), lower WLAN/Wi-Fi (2.4-2.48 GHz) and WiMAX (3.3-3.8 GHz) are available. A single stage Villard Voltage Doubler is utilized as the rectifier unit. Interdigital capacitors (IDC) are used instead of lumped components for the rectifier design in order to provide more reliability to the resultant circuit. An impedance matching unit consisting of distributed microstrip lines is also designed in order to ensure maximum power transfer between the antenna and the rectifier unit in the desired frequency bands. The impedance matching section and the rectifier unit is simulated using the Agilent ADS software. The designed rectifier unit is then fabricated and tested in order to check the validity of the design. A maximum voltage of 5.53V is measured for an input power of 14 dBm, whereas a peak RF-to-DC conversion efficiency of 42% is achieved for the same input power.

23 July 2020 in IET Microwaves, Antennas & Propagation
Verified
Journal Article
Open access
PDF file
SCSandhya Chandravanshi
Sandhya Chandravanshi
KKKranti Kumar Katare
Kranti Kumar Katare
MAMohammad Jaleel Akhtar
Mohammad Jaleel Akhtar
In this study, a novel broadband rectenna system, capable of extracting energy from multiple RF sources is presented. The proposed topology employs a novel rectifying circuit comprising a two‐port differential rectifier integrated with the hybrid coupler on a single board, which is the first structure of its kind possessing higher reliability. During measurement, the maximum efficiency of the proposed rectifying circuit is found to be at 4 dBm with the maximum DC voltage of 3.6 V. The proposed broadband RF energy harvesting circuit, comprising the newly designed rectifying circuit integrated with a broadband high gain Yagi antenna, can operate in the frequency range starting from 1.55 to 2.6 GHz. The broadband operation of the proposed rectenna is validated by performing measurement at three frequency points 1.81, 2.08 and 2.45 GHz using both single tone and two‐tone methods in the anechoic chamber as well as in the lab environment. The proposed broadband rectenna configuration can potentially be used for extracting the RF energy simultaneously from multiple RF sources, while delivering the maximum power to a standard load.