We demonstrate the design and implementation of a broad-gain and low-threshold (Jth=860A∕cm2 at 8K) quantum-cascade laser emitting between 3.7 and 4.2μm. The active region design is based on strain-compensated In0.73Ga0.27As–AlAs on InP. Laser operation in pulsed mode is achieved up to a temperature of 330K with maximum single-facet output peak powers of 6W at 8K and 240mW at 296K. The temperature coefficient T0 is 119K.
Catastrophic optical mirror damage (COMD) is analyzed for 808 nm emitting diode lasers in single-pulse operation in order to separate facet degradation from subsequent degradation processes. During each pulse, nearfield and thermal images are monitored. A temporal resolution better than is achieved. The thermal runaway process is unambiguously related to the occurrence of a “thermal flash.” A one-by-one correlation between nearfield, thermal flash, thermal runaway, and structural damage is observed. The single-pulse excitation technique allows for controlling the propagation of the structural damage into the cavity. We propose this technique for the analysis of early stages of COMD.
The transient thermal properties of high-power diode laser bars with active and passive cooling are analyzed. Both thermal imaging and the analysis of the thermal wavelength tuning behavior are employed to extract the device temperature as a function of time. A steady-state thermal situation is established with rise times of about 10 and for active and passive cooling, respectively. The latter number, however, is substantially increased by the particular properties of the external heat sink. Such results are confirmed by model calculations based on the finite element method.
1 June 2011 in Quantitative InfraRed Thermography Journal
The early stages of catastrophic optical damage (COD) in 808 nm emitting diode lasers are mapped by simultaneously monitoring the optical emission with a 1 ns time resolution and deriving the device temperature from thermal images. COD occurs in highly localized damage regions on a 30 to 400 ns time scale which is determined by the accumulation of excess energy absorbed from the optical output. We identify regimes in which COD is avoided by the proper choice of operation parameters.